User Manual

12
then follow the on-screen instructions.
Fast Roaming
With this function enabled, you can enjoy an uninterrupted internet experience when moving
around your home.
Capacity-oriented Mode
Enable this function when more than 30 client devices connect to the TCL Mesh network at the
same time.
Smart Assistant
With this function enabled, the current mobile device will connect to the 2.4 GHz Wi-Fi
network for 30 minutes. You can then discover and configure smart devices that only support 2.4
GHz Wi-Fi network at your home.
Port Forwarding
This function enables external users to access FTP and other service within the LAN.
UPnP
Universal Plug and Play (UPnP) is a set of networking protocols. With this function enabled, the
mesh node will automatically open ports for UPnP-compliant applications, e.g. P2P applications
and gaming softwares. The user will, therefore, enjoy a smoother internet experience when
using these applications.
DHCP Server
This function allows you to configure the IP addresses assigned to the client devices in the TCL
Mesh network.
DNS
If you can access a website through its IP address, but cannot access it through its domain
name, you may configure the DNS settings to solve this problem.
Date & Time
Select a time zone in this option. To make the most out of your mesh node, keep the system
time correct.
Firmware Upgrade
Perform firmware upgrades when they are available. Do not power off your mesh nodes during
the upgrade process.
Maintenance Schedule
With this function enabled, the mesh node will reboot automatically at the scheduled time.
When the
Delay Reboot
option is selected, the mesh node will delay rebooting when it is