Alto 8i 2.
1 What's in the box Make sure you read all the safety information before you use this product.
2a Overview Sound Bar main unit Source button: Press to switch the audio source among HDMI ARC/HDMI IN/OPT/BT AUX/USB modes. Power button: Press to enter SLEEP mode. Press and hold to enter STANDBY mode Volume buttons: Press to increase or decrease the volume level. Bluetooth button: Press to select the Bluetooth source. Press and hold to enter pairing mode.
HDMI IN connector AC IN 6 AC IN 6
3a Place your Sound Bar TV The ideal place to position the Sound Bar is centered underneath your TV. 3b Wall mount your Sound Bar TV Required tools: • Place the supplied wall mount template on the wall. Make sure the wall mount template is at least 2 inches below the center of the TV. • Use a level to make sure the wall mount template is positioned accurately. • Use the tape to stick the wall mount template firmly on the wall.
3b Wall mount your Sound Bar Required tools: • Insert the wall anchors in the holes on the wall. • Insert the supplied screws with the sleeves into the hole of the wall anchors. • Fix and tighten the wall bracket screws on the wall.
10 3b Wall mount your Sound Bar 11 Required tools: • Unscrew the rubber cushions from the bottom of the sound bar and set them aside for potential use in the future. 10 • Attach the included wall bracket mounts to the sound bar in the same holes the rubber cushions were removed from. 11 • With the brackets now attached to the sound bar, pick up the sound bar and attach it to the wall screws, similar to how you would hang a picture. Make sure everything is tight.
4 Connect to your TV There are 3 ways to connect your sound bar to the TV (listed in order that we recommend): HDMI ARC (refer to 4a), Optical (refer to 4b), and AUX (refer to 4c) HDMI CEC ON Note: HDMI-ARC is recommended. If you have a Roku TV, simply plug in the HDMI and follow the Roku TV Ready on-screen instructions. Optional 4a HDMI-ARC Connect the Sound Bar with your TV through the supplied HDMI cable. AC IN Connect the Sound Bar to the power supply with the supplied power cord.
4b Optical Connect the Sound Bar with your TV through the supplied Optical cable. Connect the Sound Bar to the power supply with the supplied power cord.
4c AUX Connect the Sound Bar with your TV through AUX cable (not supplied). Connect the Sound Bar to the power supply with the supplied power cord.
5a Install or replace the remote batteries Battery type: 1.5V AAA Alkaline battery x 2 1 5b 2 3 4 8 Using the Remote Press to switch the audio source to Bluetooth mode. Press and hold to enter pairing mode. Press to switch the audio source to AUX mode. 10 1 Press to enter Sleep mode. Press and hold to enter Standby mode. 2 Press to adjust the brightness of the display. Press and hold for 3 seconds to enter Night mode.
6a Pair with your Bluetooth device You can stream music from your mobile device via Bluetooth. 1. Press . 2. Press . 3. Press and hold or on the remote control or press and hold on your sound bar. > You hear a sound signal. > The Sound Bar is ready to pair. 4. Power on your Bluetooth device and activate its Bluetooth function. 5. Select TCL Alto 8i. > You hear a sound signal. > Pairing is successful. 6. If you want to re-pair with another device, please repeat step 3.
7 HELLO Sound Bar LED Display The LED display on the Sound Bar gives you information about the status of the Sound Bar.
FAQ Does this Sound Bar work with any TV? Yes, the Sound Bar is compatible with any TV that has one of the ports below: 1. HDMI supporting ARC (preferred) 2. Optical audio output (TOSLink) 3. Headphone output When the Sound Bar and TV are both on, there is an echo effect. If you use HDMI-ARC connection, please check if the HDMI-CEC feature of your TV is turned on. This feature may be called T-Link, Anynet+, SimpLink, BRAVIA Link, EasyLink or VIERA Link .
support.tclusa.com or support.tclcanada.com TS8111_NA_QSG_V1.
Alto 8i Barre de son 2.
1 Contenu de la boîte Veuillez lire toutes les informations de sécurité avant d’utiliser ce produit Barre de son Câble optique Cordon d’alimentation Câble HDMI Supports de montage mural x 2 Ancrage mural x 2 Télécommande Piles AAA x 2 Vis de fixation murale x 2 Douille x 2 Safety instructions QSG Warranty card Feuillet sur la sécurité Guide de démarrage rapide Carte de garantie Gabarit de montage mural
2a Survol Barre de son Touche d’entrée: Touches de volume: Appuyez pour alterner entre les entrées Appuyez pour audio des modes HDMI ARC, HDMI IN, augmenter ou diminuer optique, Bluetooth, auxiliaire ou USB. le niveau de volume. Touche de mise en marche Appuyez pour entrer en mode Veille. Appuyez et maintenir pour entrer en mode Attente. Touche Bluetooth: Appuyez pour sélectionner l’entrée Bluetooth. Maintenez la touche enfoncée pour entrer en mode jumelage.
AC IN 6 AC IN 6
3a Installez votre barre de son TV L’endroit idéal pour placer votre barre de son se trouve au centre, sous votre téléviseur. 3b Fixez votre barre de son au mur TV TV > 2 po (5,1 cm) Outils nécessaires: • Placez le gabarit de montage mural fourni sur le mur. Assurez-vous que le gabarit se trouve au moins 2 po (5,1 cm) en dessous de votre téléviseur. • Utilisez un niveau pour vous assurer que le gabarit de montage mural est positionné avec précision.
3b Fixez votre barre de son au mur Outils nécessaires: • Insérez les ancrages muraux dans les trous du mur. • Insérez les vis fournies avec les douilles dans les trous des ancrages muraux. • Fixez et serrez les vis des supports muraux sur le mur.
10 3b Fixez votre barre de son au mur 11 Outils nécessaires: • Dévissez les coussins en caoutchouc du bas de la barre de son et mettez-les de côté pour une utilisation éventuelle à l'avenir. 10 • Fixez les supports muraux inclus à la barre de son dans les mêmes trous que ceux où les coussins en caoutchouc ont été retirés. 11 • Les supports étant maintenant fixés à la barre sonore, prenez-la et fixez-la aux vis murales, comme vous le feriez pour un tableau. Assurez-vous que tout est bien serré.
4 Branchez votre téléviseur Il y a 3 façons de connecter votre barre de son au téléviseur (énumérées dans l'ordre que nous recommandons): HDMI ARC (voir 4a), Optique (voir 4b) et AUX (voir 4c). HDMI CEC ON Remarque: on recommande la connexion HDMI ARC. Si vous avez un téléviseur Roku, il suffit de brancher le câble HDMI et de suivre les instructions à l'écran de Roku.
4b Connexion optique Connectez la barre de son à votre téléviseur avec le câble optique fourni. Branchez la barre de son à l'alimentation électrique avec le cordon fourni.
4c Connexion AUX (auxiliaire) Connectez la barre de son à votre téléviseur avec le câble auxiliaire (non fourni). Branchez la barre de son à l'alimentation électrique avec le cordon fourni.
5a Installez ou remplacez les piles de la télécommande Type de pile: alcaline AAA 1,5 V x 2 1 5b Utilisation de la télécommande 2 10 2 Appuyez pour ajuster la luminosité de l’écran. Appuyez et maintenez pendant 3 secondes pour entrer en mode Nuit. 1 2 Appuyez sur cette touche pour passer l’entrée audio en mode AUX. Appuyez pour entrer en mode Veille Appuyez et maintenez pour entrer en mode Attente.
6a Jumelage de votre appareil Bluetooth À partir de votre appareil mobile, vous pouvez diffuser de la musique par Bluetooth. 1. Appuyez sur . 2. Appuyez sur . 3. Appuyez et maintenez ou sur la télécommande ou appuyez et maintenez sur votre barre de son. > Un signal sonore se fait entendre. > La barre de son est prête pour le jumelage. 4. Allumez votre appareil Bluetooth et activez sa fonction Bluetooth. 5. Sélectionnez TCL Alto 8i. > Un signal sonore se fait entendre. > Le jumelage est réussi. 6.
7 Affichage DEL de la barre de son HELLO L’état de la barre de son est indiqué sur l’afficheur DEL.
FAQ Cette barre de son fonctionne-t-elle avec n’importe quel téléviseur ? Oui, la barre de son est compatible avec tous les téléviseurs qui possèdent un des ports ci-dessous : 1. HDMI prenant en charge l'ARC (connexion préférable) 2. Sortie audio optique (TOSLink) 3. Sortie casque Lorsque la barre de son et le téléviseur sont tous deux allumés, il y a un effet d'écho. Si vous utilisez une connexion HDMI ARC, veuillez vérifier si la fonction HDMI CEC de votre téléviseur est activée.
Ne pas retourner le produit au magasin Nous sommes prêts à vous aider Soutien TCL: Appelez-nous d’abord pour toutes questions support.tclusa.com ou support.tclcanada.com Prenez garde lorsque vous retirez la barre de son ™ ™ ™ Tous droits réservés. TS8111_NA_QSG_V1.