User Manual

16
Reset Shop
Allows you to reset the TV to factory default settings.
1.
Press on the remote control to display the
homepage, Press ▲/◄/► to select
(Settings) >
Device Preferences > Reset
and press
OK
to enter.
2.
Press
▲/▼
to select
Factory data reset
and press
OK
to enter. Then select
Erase everything
and
press
OK
to confirm.
3.
Enter 1234 or the PIN according to the on-screen
prompt.
4.
Select
OK
and press
OK
toconrm.
5.
The
Initial setup
wizard appears. Follow the
instructions in the section
Initial setup
.
Password in Parental Control
-
The default password is 1234. You can change it to a
new one.
-
The super password is 0423. If you forget your code,
enter the super password to override any existing
codes.
Using the Hands-free TV Voice Control
(* not available for some models)
Before using the hands-free TV voice control, connect
the TV to the network and make sure it can access the
Googlewebsiterst.Thenfollowthestepsbelowto
access.
1. Turn the built-in MIC switch (next to the power button)
to on before using this function.
2. Access the Android TV homepage by pressing on
the remote control.
3. Select
(Settings) > Quick Settings > "Ok Google"
detection
and press
OK
to turn it on. You can also set
it by selecting
(Settings) > Device Preferences >
Google Assistant > "Ok Google" detection.
4. Say “OK Google” to activate it.
Notes
:
-
The availability of hands-free TV voice control
depends on your region/country/language and
your model. For details, please refer to your local
dealer.
-
A quiet surrounding is required for better function
when using it. The recommended using distance
is within 2 meters in front of TV set.
-
Turn the built-in MIC switch to off if you are not
going to use it. Or set the
"
Ok Google
"
detection
to off.
-
Standby power consumption will increase because
the built-in MIC is always listening when the
Google Assistant or voice control with the built-in
MIC is enabled.
Using more of your TV