User's Manual
Table Of Contents
- Package Contents
- Controls & Connections
- First-time Setup
- Using the Remote
- Proper Placement
- Mode & Level Settings
- Using Button Combinations
- Programming the Sound Bar
- Bluetooth Pairing
- Using Bluetooth Mode
- Connecting to a Voice Assistant
- Advanced Setup
- Connecting with HDMI ARC
- Connecting a Subwoofer
- Wall-mounting
- Product Registration and Support
- Help & Troubleshooting
- Limited Warranty
- Legal & Compliance
- Specifications
ENG - 19
Connecting to a Voice Assistant
Connect to the AUX VA port only
3.5mm Audio Cable
OR
(If there is no AUX port on the VA device, use a Bluetooth connection instead.)
1. Use a 3.5mm audio cable to connect the AUX VA port on the sound bar to an AUX port on your voice assistant device.
2. Press and hold the INPUT button on the remote for 10 seconds to enable/disable AUX VA mode.
Using the AUX VA Port to Connect
Using Bluetooth to Connect
1. Press and hold the Bluetooth button on the sound bar or remote for three (3) seconds. Search for the sound bar (VIZIO
V21t) using your VA device app. For more information, refer to the user documentation that came with the device.
2. After successful pairing, press and hold the Bluetooth button on the remote for 10 seconds to enable/disable
Bluetooth VA mode.
Only one VA mode (AUX or Bluetooth) can be enabled at a time.