User's Manual

9
GB
HT-CT180
4-559-026-11(1)
F:\HT-CZ1-11_UC\4559026111\4559026111HTCT180UC\01GB-
HTCT180UC\050BLT.fm
masterpage:
Right
BLUETOOTH Functions
Listening to music from a
BLUETOOTH device
1 Press PAIRING on the system.
The BLUETOOTH indicator (blue)
flashes.
2 Set the BLUETOOTH device in
pairing mode and select
“HT-CT180.”
If a Passkey is requested, enter
“0000.”
3 Make sure that the BLUETOOTH
indicator (blue) lights up.
• You can pair up to 8 BLUETOOTH
devices. If the 9th BLUETOOTH device
is paired, the least recently
connected device will be replaced by
the new one.
4 Press (BLUETOOTH).
The BLUETOOTH indicator (blue)
lights up.
5 Start playback on the BLUETOOTH
device.
By holding an NFC-compatible remote
device near to the N-Mark on the
system, the system and remote device
proceed to complete pairing and the
BLUETOOTH connection automatically.
1 Download, install, and start the
“NFC Easy Connect” application.
• The application may not be available
in some countries/regions.
2 Hold the remote device near to
the N-Mark on the system until the
remote device vibrates.
3 Make sure that the BLUETOOTH
indicator (blue) lights up.
Connection has been established.
BLUETOOTH Functions
Pairing this system with a
BLUETOOTH device
Note
Connecting to a BLUETOOTH
device by One-touch
Function (NFC)
Compatible remote devices
Remote devices with a built-in NFC
function
(OS: Android™ 2.3.3 – 4.x.x excluding
Android 3.x)
Note
010COV.book Page 9 Thursday, September 18, 2014 5:01 PM
コメント:アラヤ>
手のイラストが見
にくいです。