User's Manual

10
GB
HT-CT180
4-559-026-11(1)
F:\HT-CZ1-11_UC\4559026111\4559026111HTCT180UC\01GB-
HTCT180UC\050BLT.fm
masterpage: Left
• For some remote devices, this function
may be available without downloading
“NFC Easy Connect”. In this case, the
operation and specifications of the
remote device may differ from the
description in this manual.
• If pairing and the BLUETOOTH connection
fail, do the following.
– Relaunch “NFC Easy Connect” and
move the remote device slowly over
the N-Mark.
– Remove the case from the remote
device if using a commercially available
remote device case.
Turning on or off the
BLUETOOTH function
Hold SURROUND and CLEARAUDIO+
down simultaneously for 5 seconds.
On: The ANALOG indicator flashes
twice.
Off: The OPTICAL indicator flashes
twice.
Setting the BLUETOOTH
standby mode
When the system has pairing
information, the system is in
BLUETOOTH standby mode even when
it is turned off.
Hold STANDBY down for 5 seconds.
On: The ANALOG indicator flashes
twice.
Off: The OPTICAL indicator flashes
twice.
• If the system does not have pairing
information, BLUETOOTH standby mode
cannot be set.
• During BLUETOOTH standby mode,
standby power consumption increases.
Note
Tip
Notes
010COV.book Page 10 Thursday, September 18, 2014 5:01 PM