User's Manual

Multipoint Connection

This headphones is multipoint-enabled. This allows you

to easily access and play music or take a call through the

headphones from either one of two connected Bluetooth

devices.

1. To use multipoint, make sure you pair each of your

devices separately. See Pairing.

2. There is no need to switch o the headphones to pair

your second device. Press and hold for 2 seconds to

start Bluetooth pairing your second device. Bluetooth

status on your rst device will automatically disconnect.

3. After your second device is successfully paired and

connected, to enjoy multipoint, go to the Bluetooth

menu on your rst device to reactivate Bluetooth

connection status. Both your devices are now connected.

Wired Connection

For device players without Bluetooth functionality, use

the included ⅛" (3.5mm) audio cable to connect to the

headphone's audio jack.

Note: Bluetooth functionality is automatically deactivated

when audio jack is connected.

Airline Audio

Connect your headphones to the airline audio jacks. Check

jack type for proper connections.

Audio

Jack

Airline Audio Jack

3.5mm jack

Two 3.5mm jack

with one power jack