User's Manual

Pairing

Press and hold G for 2 seconds to turn on the headphones.

The LED ashes red and blue quickly as your headphones

searches for Bluetooth devices.

2. Activate your device’s Bluetooth function (refer to your

device’s user’s guide). Select Realistic BT ANC from

the list of found devices. When paired, the LED indicator

lights blue every 3 seconds.

3. Swipe / touch the right ear cup for music, call and volume

controls.

Notes:

• The headphone will disconnect and power down from your

device if they are too far apart, or left idle. To reconnect,

move the headphones closer to the device within 2

minutes.

• The last volume setting used on the headphones is

memorized after switching o.

• Music playback is paused during call functions and

resumes when the call is ended.

Clear Bluetooth Pairing

Your headphones automatically reconnects to the most

recently paired device when switched on. If you want to change

to other Bluetooth devices, or in case of problems pairing, you

may need to clear pairing before you attempt to pair again.

Press and hold

and G for 3 seconds .

Note: To delete the headphone completely from your device

memory, go to your device's Bluetooth settings menu to nd

then select to remove it.