User's Manual

ManualsBrandsTCL Technoly Electronics ManualsComputers & AccessoriesWIRELESS USB ADAPTER

http://www.mtncn.com

Most professional OEM/ODM manufacturer SHEN ZHEN MTN Electronic Co., LTD

MT-WN731NM Datasheet

150Mbps 802.11 b/g/n Wireless USB Adapter

REV：V 4.2

Date: 2013/11/20

Summary of content (8 pages)

PAGE 1
http://www.mtncn.com MT-WN731NM Datasheet 150Mbps 802.11 b/g/n Wireless USB Adapter REV：V 4.2 Date: 2013/11/20 Most professional OEM/ODM manufacturer SHEN ZHEN MTN Electronic Co.
PAGE 2
http://www.mtncn.com 1、Product Description： MT-WN731NM is a 150M wireless module. It uses a highly integrated, feature-rich MT7601U CPU, support the 2.4G band, in full compliance with the IEEE802.11n protocol standard, is also fully compatible with 802.11g and 802.11b standards. The WN731NM provide a small size with a USB interface high standards and reliable Wi-Fi, there are MAC / BBP / RF controller and high-gain power amplifier provides excellent performance.
PAGE 3
http://www.mtncn.com 3、Performance parameters: Protocol standards IEEE 802.11n；IEEE 802.11g ；IEEE 802.11b Transmission rate 11b：1/2/5.5/11Mbps 11g：6/9/12/18/24/36/48/54Mbps 11n：up to 150Mbps Frequency range 2.412 ~ 2.462GHz Operating Channels 1 ~ 11（2.4G） Transmit power (Peak) 26+/-2dBm（） Spread-spectrum technology DSSS Modulation type CCK/ OFDM/ BPSK/ QPSK/ QAM Receiver Sensitivity 11n：-68dBm@130M；-68dBm@108M 11g：-69dBm@54M 11b：-85dBm@11M WPA/WPA2/WPA-WPA2/802.
PAGE 4
http://www.mtncn.com 4、USB pin module interface definition: 1 GND 2 D+ 3 D- 4 VCC(3.3V) USB Max operating current：570mA; Operating Current：329mA 5、Block Diagram： Most professional OEM/ODM manufacturer  SHEN ZHEN MTN Electronic Co.
PAGE 5
http://www.mtncn.com 6、Product dimension： Most professional OEM/ODM manufacturer  SHEN ZHEN MTN Electronic Co.
PAGE 6
How to fix the Wi-Fi module to BP340 unit 1. Fixed the module to the module bracket 2. Fixed the bracket to the front case and conneted with a 4-pins cable 3.
PAGE 7
4. connected the WIFI cable to the mainboard 4-pins connector. 5. Fixed the top cover case Assemble finished.
PAGE 8
FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment This device complies wi th Part 1 5 of t he FCC R ules. Operation is subj ect t o the following tw o conditions: (1) this devi ce may not caus e harmful interference, and (2) this de vice must accept any interference received, including interference that may cause undesired operation.