Specifications of 802.11 b/g/n Wireless USB Module SPECIFICATIONS 802.11 b/g/n Wireless USB Module (USB Host Power Is 3.3V) Ver. 2.
Specifications of 802.11 b/g/n Wireless USB Module Contents Device Overall Description ....................................................... 3 Features ..................................................................................... 3 Specification Compliance .......................................................... 3 Block Diagram .......................................................................... 4 Channel Assignment ..................................................................
Specifications of 802.11 b/g/n Wireless USB Module Device Overall Description The WN713NM is designed to provide wireless LAN function on a small form factor with USB interface. The wireless LAN function is based on Ralink RT5370 MAC/BBP/RF controller and high gain power amplifier, fully comply with current draft IEEE 802.11n and IEEE 802.11 b/g standards. Features z z z z z z z z z z z Ralink RT5370 MAC/BBP/RF Controller 1T1R Modes 11b: 1,2,5.
Specifications of 802.11 b/g/n Wireless USB Module Block Diagram RT5370:Highly integrated MAC/BBP and 2.4GHz RF single chip Channel Assignment 2.
Specifications of 802.11 b/g/n Wireless USB Module Security z z Complete Security Features - WEP 64/128, WPA, WPA2, 802.1x, and 802.11i Cisco CCS Compliant Certification ٛ Cisco CCX Software & OS support Operating System Driver Windows 2000 Available Windows XP 32/64 Available Windows Vista 32/64 Available Windows 7 32/64 Available Linux Available MAC OS Available Operating Conditions Voltage Range 5 +/0.
Specifications of 802.
Specifications of 802.
Specifications of 802.11 b/g/n Wireless USB Module Antenna Connector Connector Vendor Part# Antenna*1 Hirose On Board PCB Antenna Host Interface Pin Definition 1 FAA pin: WLAN RF Disable/Enable 2 Vcc 3 USB Data- 4 USB Data + 5 GND 6 WLAN LED LINK 6 5 4 3 2 1 Note: Pin 6 is Low active for WLAN LED Link.
Specifications of 802.11 b/g/n Wireless USB Module COMPLIANCES Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Specifications of 802.11 b/g/n Wireless USB Module IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.