User's Manual

List of Faults

When the main machine fails, the red indicator light on the main machine will flash, and the relevant Buzzer prompt

will be heard at the same time.

Fault description Buzzer tone Solution

Please open the battery compartment and check whether the battery is properly connected, and

restart the machine.

When the battery temperature is too high or low, please wait until the battery temperature is normal

(0 40 /32° 104°F) before using.

Please check whether the wheels are stuck with foreign objects, and restart the machine

Please check whether the side brush is stuck with foreign objects, and restart the machine.

Please check whether foreign objects are stuck in the fan port, and restart the machine.

Please clean the dust box and filter screen, and restart the machine.

Please remove the roller brush, and clean the roller brush, connection part of the roller brush, roller

brush cover and the dust suction port. Please restart the machine after cleaning.

Please clean the water tank, water pump interfaces on the water tank and the machine, and the

water outlet at the bottom of the machine, and check the mop assembly. Please restart the

machine after cleaning.

Please check whether the charging area is contaminated, and clean the charging pole pieces.

Please check whether the battery is installed correctly.

Please press and hold the button and restart the machine.

bebe x 2

bebe x 3

bebe x 4

bebe x 5

bebe x 6

bebe x 7

bebe x 8

bebe x 9

Error 1: If the If the battery is abnormal,

please refer to the user manual or APP.

Error 2: If the wheel module is abnormal,

please refer to the user manual or APP.

Error 3: If the side brush module is

abnormal, please refer to the user

manual or APP.

Error 4: If the fan is abnormal, please

refer to the user manual or APP.

Error 5: If the roller brush is abnormal,

please refer to the user manual or APP.

Error 6: If the water pump is abnormal,

please refer to the user manual or APP.

Error 7: If the charging is abnormal,

please clean the charging contact area.

Error 8: If the machine is abnormal,

please shut down and restart.