User's Manual

Fault
After the robotic vacuum cleaner
returns to the self-emptying
dustbin and charging dock,
automatic dust collection does
not start
Automatic dust collection is
interrupted after startup or
garbage collection is not
thorough
The inner chamber for the dust
bag of the self-emptying dustbin
and charging dock is dirty
Cause and Solution
1. Please check whether the self-emptying dustbin and charging dock is normally powered on. When the cleaning time is more than 5 minutes,
the main machine will automatically return for recharge. After recharge, automatic dust collection will start;
2. Please check whether the cover of the self-emptying dustbin and charging dock is not closed or improperly closed; (if closed improperly, the
red light will be on);
3. Please check whether a dust bag is installed in the self-emptying dustbin and charging dock; (if closed improperly, the red light will be on);
4. To ensure smooth dust collection, it is recommended to let the main machine recharge automatically after cleaning; (manually moving the
main machine back to the self-emptying dustbin and charging dock may lead to instable connection, thus affecting dust collection);
5. Please check the dust bag regularly to see if it is full, because overloaded dust bag may break, block the dust collection pipe and cause
damage to the self-emptying dustbin and charging dock;
6. If the problem persists after the above possible causes have been considered, the components may be abnormal, please contact the
customer service department.
1. Check whether the dust bag is full. If the dust bag is full, replace it;
2. The dust collection outlet of the dust box of the main machine is jammed by foreign objects, causing the dust box baffle to fail to open;
3. Check whether the air duct of the self-emptying dustbin and charging dock is blocked;
4. During dust collection, the main machine is moved (To avoid damage, please avoid moving the main machine during dust collection);
5. There may be water in the dust box of the main machine, so that dust can not be extracted easily. Please try to prevent the main machine
extracting excessive water, which will affect the dust collection performance.
1. Fine particles will pass through the dust bag and be adsorbed on the inner wall of the dust barrel. Please check and clean up them regularly;
2. The dust bag may be damaged, please check and replace if necessary;
3. Severe dirt accumulation in the inner chamber has a certain impact on the fan and air pressure sensor. It is recommended to clean up the
garbage in the inner chamber regularly.