User's Manual

Clean up the dust channel
If the main machines stops collecting dust after a short period of dust
collection and the self-emptying dustbin indicator flashes in red after the
dust bag is replaced, it is recommended to unplug the power plug,
reverse the dust collection tower, and check whether the dust channel is
blocked by foreign objects. If the dust channel is blocked, refer to the
figure below, use a screwdriver to remove the transparent cover of the
dust channel, and clean out foreign objects.
Open the
top cover
Pull up the handle
of the dust bag to
take out the dust
bag
Discard the
old dust bag
Install a new
dust bag and
close the top
cover
Transparent cover of
the dust channel
Dust channel
Replace the dust bag
When the dust bag is full, the Self-emptying dustbin indicator flashes in
red to remind you to replace the dust bag in time. The Self-emptying
dustbin indicator is normally on in white or flashes in white when the
dust bag is in normal use.
Charging electrode
Clean the charging electrode
Please clean the charging electrode regularly, and wipe off the dust on
the charging electrode with a soft dry cloth or cleaning brush.
Charging dock
(Sweeva 3000M)
Self-emptying dustbin
(Sweeva 3500M)
Charging
electrode