User's Manual

emply the dust box
open the filter cover
take out the
filter
clean the filter
wash the dust box
and filter
sun-dry the
filter
Daily Maintenance
Clean the dust box
Empty the dust box, put the dust box close to the trash can, and
tap the dust box gently to knock off the excess dirt.
Take out the high-performance filter, and clean the filter with the
supplied cleaning brush.
The water tank, dust box and filter screen assembly can be
thoroughly rinsed with water as needed (Note: The filter cannot be
cleaned with hot water or detergent).
After cleaning the water tank, dust box and filter screen assembly
must be thoroughly air-dried. (Note: Repeated washing will destroy
the material of the high-performance filter and make it ineffective.
Please clean it with caution)
Reassemble the air-dried dust box and filter assembly, and put it
back into the robotic vacuum cleaner.
Clean the main brush
As shown in the figure below, press the buckle to take out the
protective cover, and take out the main brush upwards.
Clean the main brush with a cleaning tool, and the blade can cut
off the hair entangled on the main brush.
Remove the spool at one end of the main brush and clean away
the hair entangled on it.
After cleaning, put the main brush back and make sure it is
installed in place.
Clean the side brush
Remove the side brush and clean away the hair or foreign
objects on it. You can choose whether to wipe it with a damp cloth
according to your needs.
Put the side brush back and press it tightly to ensure it is
installed in place.