User's Manual

Operating Instructions
Power on/off
Press and hold the button for 3 seconds to turn on the machine.
Press and hold the button for 3 seconds to turn off the machine.
Start cleaning
Press the button to start the automatic
cleaning mode. After starting, the robotic vacuum
cleaner will leave the charging dock or the
self-emptying dustbin, then delineate an area of
4m×4m, and first conduct cleaning in a “bow”
shape and complete the cleaning along the wall.
Then, it will delineate the next area of 4m×4m,
and complete the cleaning of area in the same
way (cleaning in a “bow” shape first, and then cleaning along the wall);
the above process will be repeated until the entire room is cleaned.
For the parts that have not been cleaned in the process, supplementa-
ry cleaning will be conducted, and the main machine will return to the
self-emptying dustbin after cleaning.
* If the battery is too low, the cleaning cannot be started, please charge first .
* Before cleaning, all cables on the floor shall be organized to avoid power interruption or
damage to items caused by pulling the power cord during cleaning.
* In automatic cleaning mode, if the cleaning area is less than 10 m2, it will conduct cleaning
twice by default.
* Do not move the charging dock or the self-emptying dustbin during cleaning, and make sure
that the charging dock or the self-emptying dustbin is powered on; otherwise the robotic
vacuum cleaner may not be able to return for charging.
Pause
During the operation of the robotic vacuum cleaner, it will be paused
by pressing any button.
Charging
* Automatic recharge: After the cleaning task is completed, it will
automatically return for charging.
* Manual recharge: a. At the time of pause, you need to press the
button for automatic recharge; b. When the robotic vacuum cleaner is
stuck or cannot find the charging dock, please manually put the robotic
vacuum cleaner back on the charging dock for charging.
Fixed-point cleaning (Only applicable to App operation)
When the robotic vacuum cleaner conducts automatic cleaning and gets to
a certain position, or the remote control is used to control the robotic
vacuum cleaner to move to the corresponding position, click the fixed-point
cleaning function to activate the
mode. After the mode is activated, the robotic
vacuum cleaner will clean a circular area with
a radius of 1.5m centered on itself.
*The robotic vacuum cleaner cannot start the fixed-point
cleaning mode on the charging dock or the self-emptying dustbin.
Suction level selection (only applicable to APP operation)
The cleaning level can be selected according to the needs in the APP:
* Quiet level * Standard level
* Medium level * Max level
Remote cleaning mode (only applicable to APP opera-
tion)
* The manual remote control mode can be used in the APP to control
the robotic vacuum cleaner to the area that needs to be cleaned.
Sleep
If it is inactive for 8 minutes, the robotic vacuum cleaner will
automatically switch to the sleep mode.
Sleep mode will end the current task.
System resetting
In standby mode, press and hold the button for 10 seconds to
resetthe system.
After resetting the system, the data of the robotic vacuum cleaner will be
cleared and the factory settings will be restored.