RAY.DANZ 3.
English Important safety instructions Make sure you read all the safety information before you use this product. TCL Entertainment Solutions Limited bears no responsibility for accidents or damages caused by unauthorized changes, modifications or improper use of the product. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Français Consignes de sécurité importantes Assurez-vous de lire toutes les informations de sécurité avant d'utiliser ce produit. TCL Entertainment Solutions Limited ne prendra aucune responsabilité pour tous accidents ou endommages causés par des changements non autorisés, des modifications ou des utilisations inappropriées du produit. MISE EN GARDE RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR MISE EN GARDE : NE RETIREZ PAS LE COUVERCLE (OU LE DOS), SINON RISQUER UN CHOC ELECTRIQUE.
1 What's in the box Make sure you read all the safety information before you use this product.
2a Power button: Press to turn the Sound Bar main unit on or off. Overview Sound Bar main unit LED display: It indicates the Sound Bar status (e.g. volume level, sound source mode, etc.). Bluetooth button: Press to select the Bluetooth source. Press and hold to enter pairing mode. Volume button: Press to increase or decrease the volume level. Source button: Press to switch the audio source among HDMI IN/HDMI ARC/ AUX/BT/Optical/ USB modes.
2b Overview Wireless subwoofer LED AC input power connector PAIR
2c Power button Overview Remote control Source buttons Play/Pause/OK Rewind Fast forward Volume up Bass level up Bass level down Treble level up Treble level down Volume down Mute/Unmute Vertical surround on/off Sound mode on/off AV sync adjustment
3a Place your Sound Bar and subwoofer TV < 3m / 9.8' You are recommended to place the Sound Bar on the top of the table and right below the center of your TV. The distance between the subwoofer and the Sound Bar main unit should be within 3 meters (9.8 feet). 3b Wall mount your Sound Bar TV Required tools: • Place the supplied wall mount template on the wall. Make sure the wall mount template is at least 2 inches (5cm) below the center of the TV.
3b Wall mount your Sound Bar 7 8 9 Required tools: • Insert the supplied wall anchors into 2 screw holes on the wall. 7 • Insert the supplied wall bracket screws through the wall brackets into the wall anchors. 8 • Fix and tighten the wall bracket screws on the wall. 9 Required tools: • Insert the supplied wall mounting screws into the screw holes in the back of the Sound Bar main unit. 10 • Hang the Sound Bar main unit on the wall mount brackets. 11 10 105 0m m/ 41.
4a Remove the back cover of your Sound Bar Remove the back cover of your Sound Bar before connecting cables. 4b Connect to your TV by HDMI ARC Connect the Sound Bar with your TV through the HDMI cable.
4c Connect to your AV device by HDMI IN Connect the Sound Bar with the audio device (Bluray player or set top box) through the HDMI cable. 4d Optical connection You can also connect the Sound Bar with your TV or other audio devices through the supplied optical cable. Bluray player, set top box, etc.
4e AUX connection You can also connect the Sound Bar with your TV or other audio devices through the supplied AUX cable. 4f Connect to power Use the power cord.
5 Install or replace the remote batteries 1 Battery type: 1.5V AAA Alkaline battery x 2 6a Pair your Bluetooth device You can stream music from your mobile device via Bluetooth. 1. Press . 2. Press . > BT is flashing on the LED display. The Sound Bar is ready to pair. 3. Power on your Bluetooth device and activate its Bluetooth function. 4. Select TCL RAY-DANZ. > You hear a sound signal. > Pairing is successful.
6b Pair your subwoofer 2 3 1 2.4GHz The Sound Bar will pair with the Subwoofer automatically. If not sucessful, press and hold PAIR to activate pairing manually. > The LED will flash when pairing is in progress. > The LED will remain on solidly when pairing is successful. Frequency range/Max transmitting power: 2402–2480 Mhz/5dBm 7 Setup WIFI connection 2 TCL_RAY-DANZ-xxxx Upgrade the software through the webpage: 1. Power on the Sound Bar. > The LED on the Sound Bar lights up. 2.
8 Sound Bar LED display The LED display on the front of the Sound Bar gives you information about different Sound Bar status.
9 Frequently asked questions Does this Sound Bar work with any TV? The Sound Bar is compatible with any TV that has one of the below ports: 1. HDMI 2. Optical 3. AUX Will this Sound Bar work with any HDTV that is not a smart TV? Yes, the Sound Bar will work with any TV as long as it supports one of the below ports: 1. HDMI 2. Optical 3. AUX When Sound Bar and TV are both on, there’s an echo effect and audio is out of sync. Turn the speaker off.
9 Frequently asked questions How many sound modes are available? Three auto sound modes - Movies, Music and News are available. The Sound Bar will automatically switch to HDMI or optical mode when watching movies and USB or Bluetooth mode when listening to music. How do I get the best Wi-Fi connection? • Use the 5GHz band on your wireless router if available for best Wi-Fi performance. • If you see a lock icon, your Wi-Fi network requires a password, so make sure you have it available.
10 Specifications • • • Impedance: 4 Ω Frequency Response: 40Hz - 120Hz Dimension (WxHxD): 120 x 410 x 300 mm Remote Control • • Distance/Angle: 6m/30° Battery Type: AAA (1.5V X 2) Wireless Specification • • • • • • • • • • Bluetooth Version /profiles: V5.0 (A2DP, AVRCP) Bluetooth Maximum E.I.R.P: 9.7dBm Bluetooth Frequency bands: 2402 MHz ~ 2480 MHz 2.4G Wi-Fi Maximum E.I.R.P: 17.0dBm 2.4G Wi-Fi Frequency bands: 2412 MHz ~ 2462 MHz 5G Wi-Fi (Band 1, Band 2, Band 3) Maximum E.I.R.P: 17.
WE ARE READY TO HELP contact us first with any questions PDF TCL SUPPORT: www.tcl.com/support TAKE CARE WHEN REMOVING THE SOUNDBAR Copyright © 2019 TCL. All rights reserved. TS9030_EU_EN_QSG_V1.
