User's Manual

7 8
1.2 Getting started
1.2.1 Set-up
Inserting or removing the SIM/microSD card
You must insert your SIM card to make phone calls.
Before you install or remove the SIM card or microSD card, use a
pin to press the small cavity until the SIM/microSD slot pops out.
Place the SIM card with the chip facing downwards and slide it
into its housing. Make sure that it is correctly inserted.
Your phone only supports nano-SIM card. Do not attempt
to insert other SIM types like mini and micro cards,
otherwise you may damage your phone.
Charging the battery
To charge the battery, connect the charger to your phone and
mains socket. You can also charge your phone via a USB cable.
Your phone is battery embedded design with not
removable battery or back cover. Unauthorized personnel
are strictly prohibited from disassembling the phone. To
reduce energy wastage, disconnect your charger from the
plug when the battery is fully charged.
To reduce your phone’s power consumption, switch off
Wi-Fi, GPS, Bluetooth or apps running in the background
when not needed. In Settings you can also lower the
brightness of the screen, and shorten the length of time
before the screen goes to sleep.