User's Manual

47 48
6 Getting connected
Your phone can connect to the Internet using either GPRS/
EDGE/3G/4G/4G+ or Wi-Fi.
6.1 Connecting to the Internet
6.1.1 GPRS/EDGE/3G/4G/4G+
The first time you turn on your phone with the SIM card inserted,
it will automatically configure a mobile network service: GPRS,
EDGE, 3G, 4G or 4G+.
To check the network connection you are using, touch the
Application tab on the Home screen, then touch Settings >
More > Mobile networks > Access Point Names or Network
operators.
To create a new access point
A new mobile network connection can be added to your phone
with the following steps:
1 Touch on Quick setting bar to get to Settings.
2 Touch More > Mobile networks > Access Point Names.
3 Then touch key to add new APN.
4 Enter the required APN information.
5 When finished, touch key and Save.
To activate/deactivate Data roaming
When roaming, you can decide to connect/disconnect to a data
service.
1 Touch on Quick setting bar to get to Settings.
2 Touch More > Mobile networks.
3 Touch the switch to activate or deactivate data roaming.
4 When Data roaming is deactivated, you can still perform data
exchange with a Wi-Fi connection (refer to "6.1.2 Wi-Fi").
6.1.2 Wi-Fi
You can connect to the Internet when your phone is within range
of a wireless network. Wi-Fi can be used on your phone even
without a SIM card inserted.
To turn Wi-Fi on and connect to a wireless network
1 Touch on Quick setting bar to get to Settings.
2 Touch the switch in Wi-Fi to turn on/off Wi-Fi.
3 Touch Wi-Fi: detailed information of all detected Wi-Fi networks
is displayed in the Wi-Fi networks section.
4 Touch a Wi-Fi network to connect to it. If the network you
selected is secured, you are required to enter a password or other
credentials (contact network operator for details). When you’re
finished, touch Connect.
To activate notification when a new network is detected
When Wi-Fi is on and the network notification is activated, the
Wi-Fi icon will appear on the status bar whenever the phone
detects an available wireless network within range. The following
steps activate the notification function when Wi-Fi is on:
1 Touch on Quick setting bar to get to Settings.
2 Touch Wi-Fi, then key and select Advanced.
3 Touch the switch to activate/deactivate this function.
To add a Wi-Fi network
When Wi-Fi is on, you may add new Wi-Fi networks according to
your preference.
1 Touch on Quick setting bar to get to Settings.
2 Touch Wi-Fi, and then touch and select Add network.
3 Enter the name of the network and any required network
information.
4 Touch CONNECT.
When successfully connected, your phone will be connected
automatically the next time you are within range of this network.