User's Manual

4 5
1�2 Getting started
1�2�1 Set-up
Removing and installing the back cover
Installing and removing the micro SD card
Insert the micro SD card with golden contact facing downwards into the slot. Slide it out to remove
the micro SD card.
To avoid data loss and SD card damage, before removing the SD card, please ensure that
the SD card is unmounted (Settings\Storage\Unmount SD card).
Installing and removing the battery
• To install, insert and click the battery into place, then close the phone cover.
• To remove the battery, first power the phone off. Then unclip the cover and remove the battery.
Charging the battery
Connect the battery charger to your phone and main socket respectively.
To reduce power consumption and energy waste, once the battery is fully charged,
disconnect your charger from the plug; switch off Wi-Fi, GPS, Bluetooth or background-
running applications when not in use; reduce the backlight time, etc.
1�2�2 Power on your phone
Hold down the Power key until the phone powers on.
Set up your phone for the first time
The first time you power on the phone, you should set the following options: language, input method,
data connection, etc.
Even if no SIM card is installed, your phone will still power on and you will be able to connect to a
Wi-Fi network, sign into your Google account and use some of the phone's features.
1�2�3 Power off your phone
Hold down the Power key from the Home screen until the phone options appear, select Power off.