User's Manual

18 19
7
Getting connected������������������������������
To connect to the Internet with this phone, you can use GPRS/EDGE/UMTS networks or Wi-Fi,
whichever is more convenient.
7�1 Connecting to the Internet
7�1�1 GPRS/EDGE/UMTS
The first time you turn on your phone with your SIM card inserted, it will automatically configure your
network service: GPRS/EDGE/UMTS.
To check the network connection you are using, touch the Menu key from the Home screen, then
touch Settings\More\Mobile networks, and touch Access Point Names or Network operators.
7�1�2 Wi-Fi
Using Wi-Fi, you can connect to the Internet when your phone is within the range of a wireless
network. Wi-Fi can be used on your phone even without a SIM card inserted.
To turn Wi-Fi on and connect to a wireless network
• Touch the Menu key from the Home screen, then touch Settings and select Wi-Fi.
• Touch the switch beside Wi-Fi to turn Wi-Fi on or off.
• Touch Wi-Fi. The detailed information of detected Wi-Fi networks is displayed in the Wi-Fi
networks section.
• Touch a Wi-Fi network to connect. If the network you selected is secured, you are required to enter
a password or other credentials (you can contact the service provider for details). When finished,
touch CONNECT.
7�2 Browser �����������������������������������������������������������������������
Using the Browser, you can enjoy surfing the Web.
To access this feature, touch the Application tab from the Home screen, then select Browser.
To go to a web page
On the Browser screen, touch the URL box at the top, enter the address of the web page, then
confirm.
7�3 Connecting to a computer
(1)
With the USB cable, you can transfer media files and other files between your micro SD card/internal
storage and the computer.
To connect/disconnect your phone to the computer:
To connect:
• Use the USB cable that came with your phone to connect the phone to a USB port on your
computer. You will receive a notification that the USB is connected.
• Open the Notification panel and touch USB connected.
• Touch Mount in the dialog that opens if you want to transfer files.
To disconnect (for mass storage):
• Open the Notification panel and touch USB connected.
• Touch Turn off in the dialog that opens to cancel USB mass storage.
Before using MTP, make sure that the driver (Windows Media Player 11 or higher version)
has been installed.
To locate data you have transferred or downloaded in your micro SD card:
• Touch to open the applications list.
• Touch File Manager.
All data you have downloaded is stored in the File Manager, where you can view media files (videos,
photos, music and others), rename files, install applications into your phone, etc.
(1)
You can change your default connection mode via Settings\Storage & USB. Some
operations which are available under mass storage are not usable under MTP and PTP.