Quick Start Guide
7
Relinking Your LIFEDETECT
If you want to link your LIFEDETECT with another LIFECONNECT,
you can follow the steps below:
1. Long press the reset hole for more than 3 seconds.
2. Press '+' and follow instrucons within the App.
3. Stand in front of your LIFEDETECT and check for a message in
the App to ensure it is working correctly.
Installing Your LIFEDETECT
Eecve range: Please stand in front of your LIFEDETECT to see
if the LIFE App can receive detecon messages before xing your
LIFEDETECT to a table or wall.
• If yes, it means the Zigbee distance is suitable.
• If not, please select a locaon closer to your LIFECONNECT.
Desktop Installaon
Place your LIFEDETECT on the table close to the edge and aligned
with the area which you want to detect. Please try to ensure that it
is close to the edge of the table or cabinet.
The recommended installaon height is 0.5~1.5m. Please refer to
Detecon Range to select your best installaon soluon.