Quick Start Guide

9
Wall Installaon
1. Find a suitable place to install your LIFECAM.
2. Separate the metal mounng bracket from the base of your
LIFECAM.
3. Use the metal mounng bracket with its two holes as a template
to mark the mounng posion of your LIFECAM on your wall (the
distance between the two holes is 28 mm). Drill two holes into
the wall.
4. Insert the wall plugs into the holes.
5. Fix the metal mounng bracket onto the wall using the screws.
6. Reaach your LIFECAM to the metal mounng bracket which is
now xed to the wall.
LIFECAM
Note:
• Don't install your LIFECAM
outdoors.
• Avoid direct or strong sunlight.
• Avoid installing your LIFECAM
near water vapour or in areas of
high humidity.
• Please don't install your
LIFECAM in an unstable or
vibraon prone area.
• Please don’t place your
LIFECAM vercal to frequently
moving objects, such as cur-
tains and windows.
Holes in
the wall
Wall plug Metal mounng
bracket
Screw