Quick Start Guide CJB1HC004AAA
What's In The Box? LIFECAM x 1 Charger x 1 ick Qu USB cable x 1 (1.
Specification Product name LIFECAM Model name IC01 Operating frequency 2.
Getting to Know Your LIFECAM The LIFECAM is a Wi-Fi IP camera which provides remote viewing and broadcasting features when used in combination with the LIFE App. MIC Light sensor Lens Speaker LED indictor Reset hole SD card slot Metal mounting bracket USB port Note: You can adjust your LIFECAM angle by manually rotating the camera head.
Your LIFECAM: Quick Setup Guide 1. Download the LIFE Application Download the App using either of the QR codes shown below. Both QR codes are also printed on the box. Alternatively, you can also search for “LIFE” in the Apple Store or in Google Play Store. Apple Store Google Play 2. Installing a Micro-SD Card Insert the Micro-SD card according to the illustration. Note: In order to enable video recording, you will first need to insert a Micro-SD card.
3. Connecting Your LIFECAM 1) Ensure that your LIFECAM is located in your Wi-Fi signal coverage zone. For optimal performance, the Wi-Fi uploading bandwidth should be at least 0.6 Mbps. 2) Ensure that your smartphone and your LIFECAM are in the same Wi-Fi signal coverage zone. Note: This device does not support 5GHz Wi-Fi. Please connect to a 2.4GHz Wi-Fi router. 3) Connect your LIFECAM to the power supply as shown in the following figure.
5) When you hear "Ready to configure LIFECAM" from the audio prompt and the LED flashes red, select “+” in the LIFE App, and follow the on-screen instructions to add and configure your LIFECAM. Once your LIFECAM connects to the Wi-Fi network successfully, the LED will turn off. Note: Please reset your LIFECAM If the LED continues to flash, or you hear "Sorry, adding LIFECAM failed, please try again" from the audio prompt.
Installing Your LIFECAM You can place your LIFECAM on a desk or install it on a wall. Note: • Please place your LIFECAM in an area with an unobstructed view. • Please do not place your LIFECAM behind furniture or near a microwave oven. • Please do not place your LIFECAM in areas prone to high humidity or where condensation might form. Desktop Installation Place your LIFECAM on a desk in an area which is clean and dry, with an unobstructed view, and which is beyond the reach of children.
Wall Installation 1. Find a suitable place to install your LIFECAM. 2. Separate the metal mounting bracket from the base of your LIFECAM. 3. Use the metal mounting bracket with its two holes as a template to mark the mounting position of your LIFECAM on your wall (the distance between the two holes is 28 mm). Drill two holes into the wall. 4. Insert the wall plugs into the holes. 5. Fix the metal mounting bracket onto the wall using the screws. 6.
FAQ 1. Q: Which OS version is compatible with the App? 2. A: iOS 7.0 and above versions, Android 4.0 and above versions. Q: What should I do if I am unable to add my LIFECAM? A: 1) Use the reset pin to reset your LIFECAM. Wait until you hear the audio guide and then try to add it again. 2) Please check that you have entered the correct Wi-Fi SSDI and password, then try again.
3. we do not recommend that you connect your LIFECAM to your Wi-Fi this way. Q: What should I do when my LIFECAM is offline? A: 1) Please check your LIFECAM's power supply and Wi-Fi connection. 4. 5. 6. 2) Reconnect and reset your LIFECAM, and add it again in the App. Q: Does my LIFECAM only work with the LIFE App within the same WLAN? A: No. If your LIFECAM and LIFE app can connect to the internet, there are no limits to the distance which can be between them.
7. Q: Is it normal to hear a “snip-snap” sound inside the camera when it switches to night mode? 8. A: Yes, it’s normal. LIFECAM will switch its internal IR-CUT filter on or off when it changes between day and night modes. Q: Is it normal for the housing of my LIFECAM to feel warm? 9. A: Yes. It’s normal when the LIFECAM switches to night mode. Q: Can the camera still record, even when it is offline? A: The camera can still record to the local SD card, even when it is offline.
12. Q: What do I do if my SD card can’t be read? A: 1) Please check that you have inserted the SD card correctly. 2) Please make sure the SD card format is FAT32 or EXFAT. 3) Sometimes, restarting the camera will solve this issue. 4) Please try to reinsert the SD card. 13. Q: How many accounts can my LIFECAM be linked with? A: In order to protect the user's account security, only one LIFECAM can be linked with one account. That account holder will then be the administrator.
Safety and Use Electronic Devices Turn off your device near high-precision electronic devices. The wireless device may affect the performance of these devices. Such devices include hearing aids, pacemakers, fire alarm systems, automatic gates, and other automatic devices. If you are using an electronic medical device, consult the device manufacturer to confirm whether radio waves affect its operation.
ers with strong magnetic fields, such as an induction cooker or a microwave oven. Otherwise, circuit failure, fire, or explosion may occur. • Do not leave your wireless device in a very hot or cold place. Otherwise, malfunction of the product, fire, or explosion may occur. • Do not subject your wireless device to serious collision or shock. Otherwise, wireless device malfunction, overheating, fire, or explosion may occur. Child Safety • Put your wireless device in places beyond the reach of children.
• Do not use the wireless device in dusty, damp and dirty places or within magnetic fields. Otherwise, malfunction of the circuitry may occur. • The wireless device may interfere with nearby TV sets, radios and PCs. • In accordance with international standards for radio frequency and radiation, use wireless device accessories approved by the manufacturer only. Traffic Safety When driving, do not use the wireless device.
• • • • • • • • • • environmental conditions (moisture, humidity, rain, infiltration of liquids, dust, sea air, etc.). When this device is switched on, it should be kept at least 20 cm from the body. When this device is switched on, it should be kept at least 15 cm from any medical device such as a pacemaker, a hearing aid or insulin pump, etc. When replacing the cover, please note that this device may contain substances that could create an allergic reaction. Do not paint it.
Certification This symbol on the device means that these products must be taken to collection points at the end of their life: - Municipal waste disposal centres with specific bins for these items of equipment. - Collection bins at points of sale. They will then be recycled, preventing substances being disposed of in the environment and allowing their components to be reused. In European Union countries: These collection points are accessible free of charge.
The chargers designed for your device meet the standard for safety of information technology equipment and office equipment use. They are also compliant with the ecodesign directive 2009/125/EC. Due to different applicable electrical specifications, a charger you purchased in one jurisdiction may not work in another jurisdiction. They should be used for this purpose only.
The World Health Organization (WHO) considers that present scientific information does not indicate the need for any special precautions for use of wireless devices. If individuals are concerned, they might choose to limit their own or their children’s RF exposure by limiting the length of use to keep device away from the head and body. Additional WHO information about electromagnetic fields and public health are available on the following website: http://www. who.int/peh-emf.
- Consult the dealer or an experienced radio/ TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. For the receiver devices associated with the operation of a licensed radio service (e.g. FM broadcast), they bear the following statement: This device complies with Part 15 of the FCC Rules and Innovation, Science and Economic Development Canada licence-exempt RSS standard(s).
sure to remove or clear all personal information before you recycle, return, or give away your product. Choose your apps and updates carefully, and install from trusted sources only. Note that any data shared with TCL Communication Ltd. is stored in accordance with applicable data protection legislation. For these purposes TCL Communication Ltd.
This device complies with Innovation, Science and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: - This device may not cause interference, and; - This device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003.
Under the terms of this warranty, you must immediately inform your vendor in case of a conformity defect on this device and present a proof of purchase. The vendor or repair centre will decide whether to replace or repair this device, as appropriate. Repaired or replaced versions of this device are warranted for ONE (1) month unless there are statutory provisions to the contrary.
7) Use of this device for a purpose other than that for which it was designed. 8) Malfunctions caused by external causes (e.g., radio interference from other equipment, power voltage fluctuations). 9) Faulty connections resulting from unsatisfactory radio transmission or caused by the absence of radio relay coverage. Warranty is also excluded for this device on which markings or serial numbers have been removed or altered.
All rights reserved © 2017 TCL Communication LTD.
