User Guide
Table Of Contents
- Getting to Know Your Mobile Hotspot
- LED Description
- Indicators
- Inserting the SIM card
- Removing the SIM card
- Inserting/Removing the battery
- Charging Your Mobile Hotspot
- Charging other devices
- Forgot your password?
- OS supported
- Connect your Wi-Fi device to your Mobile Hotspot
- Use the WPS
- Managing Your Mobile Hotspot
- Accessing Your Mobile Hotspot
- Access Using a USB Cable
- Change Mobile Hotspot Admin Password
- Change Mobile Hotspot Network Name (SSID)
- Change Mobile Hotspot Wi-Fi Password
- How to use the Mobile Hotspot Whitelist Function
- Updating Your Software Version
- Safety and Use
- Conditions of use
- Radio Waves
- Licenses
- General Information
- 12 Month Limited Warranty
- Electronic Information
1 2
GETTING TO KNOW YOUR MOBILE
HOTSPOT
Power key
WPS key
LED DESCRIPTION
Part Description
Power key Hold the Power key for 3 seconds to
power the device on/off.
WPS key Hold the WPS key for 3 seconds to
activate the WPS function. Once
activated, the Wi-Fi LED indicator will
flash every two seconds. If the network
is not accessed within 2 minutes,
device will automatically exit WPS
mode.
LED
indicators
Displays Wi-Fi, signal, battery, and SMS
status.
LED
indicators
Charging
out port
Charging in
port
Charging in
USB Port
Use the USB Type-C port to charge
your device and connect your device
to the client via the USB cable.
Charging out
USB port
Use the USB port to charge other devices,
such as tablets and smartphones.
Reset Press Reset key for 3 seconds to reset
device. All LED indicators will flash
blue 2 times to indicate that the device
has been reset to factory mode.
Reboot Hold Power key for 10 seconds to
restart device.
INDICATORS
When the hotspot is powered on, the following icons will
illuminate. For a description of the icons, please refer to
the table below:
Wi-Fi Indicator (Blue LED)
Solid Blue
Wi-Fi is active.
Flashing Blue
WPS mode is active.