Welcome Start Guide P10000243 CJB1RL0TBAAA
TABLE OF CONTENTS Getting to Know Your Mobile Hotspot................... 1 Change Mobile Hotspot Wi-Fi Password.............13 LED Description........................................................ 1 Indicators.................................................................... 2 How to use the Mobile Hotspot Whitelist Function....................................................................13 Inserting the SIM card.............................................. 4 Updating Your Software Version.....
GETTING TO KNOW YOUR MOBILE HOTSPOT Power key WPS key Charging out port LED indicators Charging in port LED DESCRIPTION Part Description Power key Hold the Power key for 3 seconds to power the device on/off. Hold the WPS key for 3 seconds to activate the WPS function. Once activated, the Wi-Fi LED indicator will flash every two seconds. If the network is not accessed within 2 minutes, device will automatically exit WPS mode. Displays Wi-Fi, signal, battery, and SMS status.
Signal Indicator (Red or Blue LED) SMS Indicator (Blue LED) Solid Blue Solid Blue Registered and connected to network. Good coverage: 3 LEDs all light up Middle coverage: 2 LEDs light up Weak coverage: 1 LED lights up New message Flashing Blue Network disconnected. Solid Red No network, no SIM card or SIM card error, limited or no service.
INSERTING/REMOVING THE BATTERY Ensure that the pins on the battery are aligned with the pins on the device before fully inserting the battery. 2. Press and push the Nano SIM card to install it in the SIM card slot. Close the back cover with the loopholes aligned. CHARGING YOUR MOBILE HOTSPOT REMOVING THE SIM CARD There are two ways to charge your mobile hotspot: Do not pull the SIM card out forcefully. Press and hold the flat spring, and then pull the SIM card out. 1.
When the device is powered off, it takes about 3 hours before being fully charged. 2. Charge using a computer and USB data cable You can also charge the device by connecting it to a PC with the USB cable. When the device is powered off, it takes about 4 hours to complete charging. Note: When red battery indicator lights up, device should be charged in order to protect the battery. OS SUPPORTED CHARGING OTHER DEVICES Windows (32 bit & 64 bit) 7/8/8.1/10 Mac OS X 10.6 to 10.
Advanced to choose SSID from the list of available networks. • From an iOS device: Settings -> Wi-Fi. Choose SSID from the list of available networks. • From an Android device: Settings -> Wi-Fi settings. Choose the SSID from the list of available networks. 3. Enter password located on the label on the back panel and click OK. MANAGING YOUR MOBILE HOTSPOT USE THE WPS If your Wi-Fi device supports WPS, you do not have to input the password manually after WPS connection has been established.
4. Select the Save Password checkbox if you wish to bypass the login screen in the future. 5. Click Login. If you entered the correct password, the Web User Interface screen appears. ACCESS USING A USB CABLE 1. Connect your Mobile Hotspot to your PC using the USB cable. 2. Power on your device. 3. Open a browser and enter http://mobile.hotspot or http://192.168.0.1 in the address bar. The Mobile Hotspot login screen will appear. 4. Enter your Password in the field provided.
CHANGE MOBILE HOTSPOT WI-FI PASSWORD 1. Access http://mobile.hotspot or http://192.168.0.1. 2. Click Settings in the navigation area. 3. Select the Wi-Fi Settings tab. 4. Change the value that appears in the Password field in the SSID area. 5. Click Apply in the SSID area to save your changes on the Wi-Fi Settings tab of the Settings screen. HOW TO USE THE MOBILE HOTSPOT WHITELIST FUNCTION Your mobile hotspot is equipped with a “whitelist” function that will allow you to secure your network’s privacy.
4. If an update to your Mobile Hotspot is available, a window will display showing System update available. Click the Download button to download the update. 5. Once download has been completed, click the Update button to complete the installation of the most recent software version for your Mobile Hotspot. Approved Firmware Versions This device will only operate with firmware versions that have been approved for use by T-Mobile and the device manufacturer.
Do not subject your device to high temperatures or attempt to use it in locations where flammable gases may be present such as fuel stations. Keep your device and its accessories away from children. Do not allow children to use your device without supervision. Only use approved batteries and chargers to avoid the risk of explosion. Observe the laws and regulations of device use. Respect others’ privacy and legal rights when using your device.
affiliates and are compatible with your hotspot device. TCL Communication Ltd. and its affiliates disclaim any liability for damage caused by the use of alternate chargers or batteries. Your mobile hotspot should not be disposed by way of municipal waste. Please consult local regulations for disposal of electronic products. Battery and accessories: In accordance with regulations, your battery will not be charged upon purchase of device. Please charge batteries before first use.
Chargers: Home A.C./ travel chargers will operate within the temperature range of: 0°C (32°F) to 40°C (104°F). Chargers designed for your mobile hotspot meet the standard for safety of information technology equipment and office equipment use. Due to different applicable electrical specifications, a charger that you purchased in one region may not work in another region. They should be used for this purpose only.
Additional information on SAR can be found on the Cellular Telecommunications & Internet Association (CTIA) Web site: http://www.ctia.org/ The World Health Organization (WHO) considers that present scientific information does not indicate the need for any special precautions for use of routers. If individuals are concerned, they might choose to limit their own or their children’s RF exposure by limiting the length of calls, or using “hands-free” devices to keep routers away from the head and body.
Please note by using the device some of your personal data may be shared with the main device. It is under your own responsibility to protect your own personal data, not to share with it with any unauthorized devices or thirdparty devices connected to yours. For products with WiFi features, only connect to trusted Wi-Fi networks. Also, when using your product as a hotspot (where available), use network security. These precautions will help prevent unauthorized access to your device.
On our website, you will find our FAQ (Frequently Asked Questions) section. You can also contact us by e-mail to ask any questions you may have. An electronic version of this user guide is available in English and other languages according to availability on our server: https://us.alcatelmobile.com Disclaimer Certain variations may be present between mobile hotspot and user manual description depending on software release or specific operator services. TCL Communication Ltd.
