User's Manual

3 4
1. Use a SIM pin to open the slot.
2. Insert/Remove the SIM card and microSD card.
Note: microSD cards are sold separately.
1.3 Battery
To optimize battery performance, be sure to fully charge your
device before using it for the first time.
1.3.1 Charging the Device
1. Insert the small end of the charging cable into the charge
port as shown.
Power key
• Press: Lock the screen/Light up the screen.
• Press and hold: Show the popup menu to select
from Power off, Restart or screenshot.
• Press and hold the Power key and Volume key to
take a screenshot.
• Press and hold the Power key for at least 10
seconds to force reboot.
Volume Keys
• In call mode, adjusts the earpiece or headset
volume.
• In Music/Video/Streaming mode, adjusts the media
volume.
• In general mode, adjusts the ringtone volume.
• Mutes the ringtone of an incoming call.
• In camera preview mode, press Volume key to take
a photo or press and hold to take a burst shot.
1.2 SIM Card
The SIM (Subscriber Identity Module) card identifies your device to
the wireless network. You can't make or receive phone calls without
a properly installed SIM card unless it's an emergency call (911).
You don't need to power off your device before inserting or
removing the SIM card.
Note: Your device only supports Nano SIM cards. To avoid damage
to your device, do not attempt to insert any other SIM types.
1.2.1 Insert/Remove the Nano SIM and microSD
Cards