MOVETIME Track&Talk watch Quick Start Guide CJB1F61ALAAA
Know your watch Overview A B H C I D E F J G Front Back A Watch-button B Speaker C Volume + On the Home screen: Press to open the phonebook, press again to choose contacts. In the List mode: Press to increase the volume or page up. D Volume - On the Home screen: Press to enter the voice messages list. In the List mode: Press to decrease the volume or page down. When you have an incoming voice call, short press to answer. Press for 3 seconds to start recording.
E SOS key Emergency calls: Long press the ‘SOS’ key for at least 3 seconds. F Power key • • • • • • Power on/off. Enter into the volume list. When you have an incoming call, short press to reject the call. On the Home screen, short press to enter the volume mode. On all screens other than Home, short press once to go back. Depress the button for at least 8 seconds to initiate a system reboot. G Microphone H Wristband I SIM slot J Charging port Notes: • The screen will light up by pressing any key.
Inserting Nano SIM card 4
Basic operations on your watch Power on/off Press and hold the Power key for 3 seconds to power on/off your watch. Press and hold the Power key for 8 seconds to reboot when your watch crashes. SOS Press and hold the SOS key for 3 seconds on any screen (except the incoming/ongoing/dialing call screen) to call five key family members. 1. Once your watch has obtained a fix on your location, it will send details of your location to 10 chosen family members. (Application shows the SOS alarm screen with prompt).
3. Press Volume - for 3 seconds to send a voice message to chosen family number. Note: Press the Power key to go back to the Home screen. Volume adjustment • Short press power on/off button first, then press Volume + to increase the volume. • Short press power on/off button first, then press Volume - to decrease the volume. Note: Decrease the volume to mute your watch. When you have an incoming call, your watch will vibrate.
Using the application from your smartphone Download the application from App Store or Google play. Pairing Input the IMEI to pair your watch Obtain the information of IMEI number through the package information or pressing Volume +/- and the SOS key in the same time until the information displayed on the screen. Then input the IMEI number to the application information bar and confirm. Input IMEI and press Confirm.
Scan the QR code to pair your watch You can share the QR code to add some group members. Scanning the QR code will be automatically adjusted according to the interval time. Functions Application screen Slide left to find the list Hide or show the shortcut menu. Click to refresh the watch location instantly.
Click to enter the details page of Electronic fence. Click to jump to the navigation page. Steps. Power. Click to enter the voice message screen. Click to dial by the watch. Member management Touch Family numbers to open the member list. Set the local emergency call number here. Note: Each device will have only one administrator, and the user will be regarded as an administrator for the first time.
Administrator can transfer the management rights in the members’ management page. Voice message to enter the voice screen. Touch When you create a voice message, the length of each recording is 15s. You can dialogue with some group members, or dialogue with your children alone.
Safe zone Touch to enter the Safe zone screen. In this function, you can set an area on the map as a safe area for your child. When your child leaves the security area, you will be notified. Pay attention that the timeliness of the notification will depend on the frequency of the location. The longer interval time for positioning that you set, the time to receive the notification will be relatively longer. Save power Touch to enter the power screen.
Mute time Touch Mute time to set the reminder function of your watch. You can set to mute or cancel the vibration according to the actual environment in use by your children. Pay attention that in the silent mode, children can recover the setting by adjusting the volume of the watch. But in the vibration mode, it need to be recovered through application setting. Upgrade Touch Update to upgrade your watch and App. The status bar at the bottom will display the related downloading progress when upgrading.
FAQ 1. Unable to obtain the position of your watch Go to check if your watch has a SIM card or if you’re in a place where can’t receive the signal. If SIM was inserted with device already powered on, it will not register as this device does not support “hot swap”. In this case user will need to restart (power off/on device) to restore service. 2. Unable to obtain the verification code You need to open the relevant SMS receiving service. For more information, consult your local operators. 3.
9. Storage and use of location data for user For all the data related to you, we will only use the queries you submit to us. We will not use for any commercial application or development without authorisation. www.sar-tick.com This product meets applicable national SAR limits of 4W/kg. The specific maximum SAR values can be found in the section of this user guide.
and collection facilities; instead they are to be taken to collection points for them to be recycled. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCRDING TO THE INSTRUCTIONS Following air regulation, the battery of your product is not charged. Please charge it first. RoHs Approval This device is in compliance with the restriction of the use of certain hazardous substances in electrical and electronic equipment Directive 2011/65/EU (RoHs Directive).
• • • • Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.
SAR compliance for body operation is based on a separation distance of 0 cm between the device and the human body. During use, the actual SAR values for this device are usually well below the values stated above. This is because, for purposes of system efficiency and to minimize interference on the network, the operating power of your device is automatically decreased when full power is not needed. The lower the power output of the device, the lower its SAR value.
Under the terms of this warranty, you must immediately inform your vendor in case of a conformity defect on this device, and present a proof of purchase. The vendor or repair center will decide whether to replace or repair this device, as appropriate. Repaired or replaced this device is warranted ONE (1) month unless there are statutory provisions to the contrary.
