User's Manual

LED description
Part
Description
On/off button
Press “Power” key for 3 seconds, to power on/off the terminal device.
WPS key
Press “WPS” key 3S to activate WPS function.
Wi-Fi LED will blink every 2 seconds. If no Wi-Fi user access within 2
minutes, it will automatically exit from WPS mode.
LED indicators
It shows signal, Wi-Fi, SMS, battery status.
Charging/USB Port
Charger your device
Connect the client to your device via USB cable.
Reset
Long press both “Power” and “WPS” key 6S, all LED quick flash in blue
for 4 times, reset device to factory mode.
Reboot
Long press “Power” key 10S, reboot device.
Indicators:
When the hotspot is powered on, the following icons will light on. For a description of the
icons, refer to the following table.