User Guide

Settings 109
2. Touch Bluetooth.
 The Bluetooth settings open.
Bluetooth Settings Operations
● Enable Bluetooth: In Bluetooth settings, touch the slider or .
 When enabled, confirmation appears for your phone to be discoverable by other devices.
Follow the onscreen instructions.
 Touch to enable and to disable.
 Alternatively, touch Bluetooth > or .
● Pairing Bluetooth Devices: Make sure the other devices are set to be discovered. From
Bluetooth settings, touch the device name in “Available devices” and follow the onscreen
instructions.
 Depending on the device, you may be required to enter or accept a passkey.
 If the target device does not appear, touch Refresh to search again.
 This setting is available when Bluetooth is enabled.
● Change the Name of a Paired Device: From Bluetooth settings, touch Settings next to a
paired device name, touch Name, enter a new name, and touch OK.
 Emoji cannot be used in a device name.
 This setting is available when Bluetooth is enabled.
● Cancelling Pairing: From Bluetooth settings, touch Settings next to a paired device name,
and then touch FORGET.
 This setting is available when Bluetooth is enabled.
● Enable Service from Paired Device: From Bluetooth settings, touch Settings next to a
paired device name, and then mark Internet access or Contact sharing.
● Search for Other Devices: From Bluetooth settings, touch Menu > Refresh.
 This setting is available when Bluetooth is enabled.
● Check Files Received via Bluetooth Transfer: From Bluetooth settings, touch Menu > Show
received files, and follow the onscreen instructions.