User Manual

32
33
7.4 Connecting to a computer ..................
With a USB cable, you can transfer media files and other files
between microSD card/internal storage and computer.
Before using MTP or PTP you should firstly mark USB
debugging.
• To access this function, touch Settings\About, then touch
Build number 7 times. Now you may touch Settings\
Developer options\USB debugging.
To connect/disconnect your device to/from the computer:
• Use the USB cable that came with your device to connect
the device to a USB port on your computer. You will receive a
notification that the USB is connected.
To disconnect (from mass storage):
• Unmount the microSD card on your computer.
To locate the data you have transferred or downloaded in
the internal storage, touch File Manager, all data you have
downloaded is stored in File Manager, where you can view
media files (videos, photos, music and others), rename files,
install applications into your device, etc.
To format a microSD card
• Touch on the homescreen to access Settings.
• Touch Storage.
• Touch Erase SD card. On the screen a popup warns you that
formatting the microSD card will erase its contents, touch
Erase SD card.
7.5 Sharing your mobile data
connection ..............................................
You can share your device’s mobile data connection with
other devices via AT&T AllAccess by turning your device into a
portable Wi-Fi hotspot.
To share your device’s data connection as a portable Wi-Fi
hotspot
• Touch on the homescreen.
• Touch AT&T AllAccess icon .
• Touch the on/off switch to turn on/off your device’s mobile
hotspot.
• Then following the instructions on your device to share your
device’s internet connection with other devices.
7.6 Connecting to virtual private
networks .................................................
Virtual private networks (VPNs) allow you to connect to the
resources inside a secured local network from outside that
network. VPNs are commonly deployed by corporations,
schools, and other institutions so that their users can access
local network resources when not inside that network, or when
connected to a wireless network.
To add a VPN
• Touch on the homescreen to access Settings.
• Touch More>VPN and then touch .
• In the screen that opens, follow the instructions from your network
administrator to configure each component of the VPN settings.
• Touch Save.
The VPN is added to the list on the VPN settings screen.
Before adding a VPN, you should set a lock screen
pattern, PIN code or password for your device.
To connect/disconnect to a VPN
To connect to a VPN:
• Touch on the homescreen to access Settings.
• Touch More\VPN.
• VPNs you have added are listed; touch the VPN you want to
connect with.