User's Manual

7
 The LED indicators will light on indicate current status.
 If there have been no Wi-FI access or operation of your device, your device enters sleep
mode to save power.
 There are two layers ofsleep mode:
If no transmissions or operation of your device in 10mins, LED indicators will be OFF, but
WLAN is still enabled; LED indicatorturn and exit sleep mode when Wi-Fi access begin or
operate your device. .
If no transmissions or operation of your device in 30mins, WLAN will be disabled.
Pressthe Power key to turn on LED indicatorand exit sleep mode. WLAN function is enabled
and Wi-Fi devices can reconnect to the Ride-Fi
 The time required to recover the network connection varies by environment, settings, etc.
.
SIM Card
The SIM card is an IC card containing your device's device number and other customer information.
Note
Handling a SIM Card
: Your device's SIM card is preinstalled.
Keep the following in mind when handling a SIM card.
● Customer is responsible for any damage caused by inserting the SIM card in another-brand IC
card reader, etc. The company is not responsible in such case.
● Always keep the IC chip clean.
● Wipe clean with a dry, soft cloth.
● Avoid applying labels. May damage the SIM card.
● See instructions included with the SIM card for handling.
● The SIM card is the property of the company.
● The SIM card is replaceable (at cost) in case of loss/damage.
● Return the SIM card to the company when cancelling subscription.
● Returned SIM cards are recycled for environmental purposes.
● Note that SIM card specifications and performance may change without notice.
● It is recommended that you keep a separate copy of information that is stored on the SIM card.
The company is not responsible for damages from stored information that is lost.
● Always follow emergency procedures to suspend service if your SIM card or device (SIM card
inserted) is lost or stolen. For details, contact Customer Service.