User's Manual

7.4 Security

Select menu/settings/security, then enter the security submenu by inputting the phone

code (default phone code: 0000). You can set entry code for your Messages, Contacts,

and Recent Calls here.

Phone Lock: Including phone code activation and inactivation, and password resetting. If

you activate the phone code, you have to enter the phone code every time when the cell

phone powers on.

PIN Settings: includes PIN code checking and PIN code resetting. When PIN code is

activated, the PIN code needs to be entered when cell phone turns on. If you enter

incorrect PIN code for 3 times, you should enter PUK code to reset PIN code. PIN code

and PUK code are supplied by with the UIM card.

Contacts Lock: setting protective code to Contacts, the code is the same as phone code.

Recent Calls Lock: setting protective code for Recent Calls, the code is the same as

phone code.

Messages Lock: setting protective code for SMS service, the code is the same as phone

code.

Restore Factory Setting: chosen this item, the phone will be resumed to original settings

when it came out from the factory. Please be aware that after selecting the restore factory

setting, all the settings of user will be deleted.

7.5 Sound

Select Menu/Settings/Sound, you can enter the sound settings menu.

Press the Select key to enter the submenu; you can see the following operations:

Set the volume or the ring tone of incoming call, SMS, Alarm, and the alert mode of

incoming call, SMS, alarm, missed call and power on/off.

8. Entertainment

The phone is embedded with one game: Tetris. Please refer to the game instructions for

details and operations.