User's Manual
Table Of Contents
- Table of Contents
- Introduction
- Get Started
- Basic Operations
- Your tablet interface
- Camera and Video
- Useful Apps and Features
- Connectivity
- Global Services
- Activate Sprint Worldwide Service on Your Account
- About Tablet
- System updates
- Accessibility Settings
- Date & Time Settings
- Factory Data Reset
- Backup and Reset
- Language & Input Settings
- Security Settings
- Location Settings
- Apps Settings
- Battery Settings
- Storage Settings
- Sound & notification Settings
- Display Settings
- More Settings
- Data Usage Settings
- Bluetooth Settings
- WLAN Settings Menu
- For Assistance
8
Charging the Battery
To charge your tablet, connect the charger to your tablet and mains socket.
● When using your tablet for the first time, charge the battery fully (approximately 5 hours).
You are advised to fully charge the battery. Charging status (
) is indicated by the percentage on
screen while the tablet is powered off. The percentage increases as the tablet is charged.
1 Insert the small end of the micro USB cord into the battery charge port on the bottom of your tablet.
Incorrect
Correct
2 Insert the large end of the micro USB cord into an external USB port on charger.
3 After charging, remove the micro USB cable from both the tablet and the charger.
To reduce power consumption and energy waste, when battery is fully charged, disconnect your
charger from the plug; switch off Wi-Fi, GPS, Bluetooth or background-running applications when
not in use; reduce the backlight time, etc.
This device cannot be charged through USB computer connection. Please plug in your charger
before first usage.
Power on Your Tablet
Press and hold the Power key until the tablet power on, unlock your tablet (Slide, PIN, Password,
Pattern, None) if necessary and confirm. The Home screen is displayed.
● See Lock and Unlock Your Screen for information about using the screen.
If you do not know your PIN code or if you have forgotten it, contact your network operator. Do not leave
your PIN code with your tablet. Store this information in a safe place when not in use.
Set up your tablet for the first time
The first time you power on the tablet, you will hear the voice from your tablet which is talking about the
Talkback feature. To activate this feature, double tap the center of your touch screen, or touch Next to
continue activation. Set the following options:
● Select the tablet's language, then touch NEXT.
● Touch NEXT to enter the Wi-Fi connection.
● Select an available Wi-Fi, then input the password to connect, or skip this step directly by touch
SKIP ANYWAY.
● Touch FINISH to complete the setup.
● When the tablet is powered on, you can connect to a Wi-Fi network to sign into your Google
account and to use some features.