User's Manual

Table Of Contents

Wi-Fi

Wi-Fi provides wireless Internet access over distances of up to 300 feet. To use your tablet’s Wi-Fi, you

need access to a wireless access point or “hotspot.”

The availability and range of the Wi-Fi signal depends on a number of factors, including infrastructure

and other objects through which the signal passes.

Turn Wi-Fi On and Connect to a Wireless Network

Use the Wireless & networks setting menu to enable your tablet’s Wi-Fi radio and connect to an

available Wi-Fi network.

1 From Home screen, tap Apps > Settings .

2 Tap Wi-Fi.

● The Wi-Fi settings menu appears.

3 Tap the Wi-Fi slider to turn Wi-Fi on .

● Wi-Fi is enabled. You will see the names and security settings of in-range Wi-Fi networks.

● To disable Wi-Fi, tap the slider again

4 Tap a Wi-Fi network to connect, enter the password (if it’s not an open network), and then tap

Connect.

● Your tablet is connected to the Wi-Fi network. You will see (

) in the status bar.

● The password, for a household wireless LAN router, is sometimes found on a sticker on the

router (WEP, WPA, KEY, etc.). Contact the router manufacturer for information. For password

for a public wireless LAN, check with user’s service provider.

● Entering a password is not required if an access point is not security protected.

Notes:

● The next time your tablet connects to a previously accessed secured wireless network, you will

not be prompted to enter the password again, unless you reset your tablet to its factory default

settings or you instruct the tablet to forget the network.

● Wi-Fi networks are self-discoverable, which means no additional steps are required for your

tablet to connect to a Wi-Fi network. It may be necessary to provide a user name and password

for certain closed wireless networks.

Wi-Fi Settings

Use the Wi-Fi settings menu to manually set your Wi-Fi connection options.