User's Manual

! !
!
Connect the battery charger to your phone cradle(or phone) and
mains socket respectively.
• Charging may take about 20 minutes to start if the battery is flat.
• Be careful not to force the plug into the socket.
• Make sure the battery is correctly inserted before connecting the
charger.
• The mains socket must be near to the phone and easily accessible
(avoid electric extension cables).
• When using your telephone for the first time, charge the battery
fully (approximately 3 hours). You are advised to fully charge the
battery.
• To reduce power consumption and energy waste, when battery is
fully charged, disconnect your charger from the plug; reduce the
backlight time, etc.
The charge is complete when the animation stops.
!
2.2 Power on your phone
Hold down the key until the phone powers on. If the device ask
for the lock code, enter the lock code, and select OK. The factory
setting for the lock code is 0000.
2.3 Power off your phone
Hold down the key until the phone powers off.
!
3 Calls...............................
3.1 Making a call
! 7
!