CJBXXXXXXAAA
TABLE OF CONTENTS Watch Overview..................................................................... 1 What’s in the box........................................... 4 Getting Started.......................................................... 5 Home screen.................................................. 5 Powering......................................................... 5 Charging......................................................... 5 Changing band..............................................
TABLE OF CONTENTS MOVETIME APP Data privacy..................................................29 Licenses....................................................................31 Warranty....................................................................31 Disclaimer ................................................................35 Recycling .....................................................36 APPROVED FIRMWARE VERSIONS ..................38 EMERGENCY CALL ...............................................
Overview Clasp Strap Volume/ Scroll up Power key Press: Go back to previous screen Press 3s: Power on/off Press 8s: Restart 1 Speaker Home key Charging port Microphone Volume/ Scroll down 2
What’s in the box Charging port SM06 watch Strap USB interface Quick guide Charger Charging dock 3 4
Getting Started Home screen Press the Power key to instantly access the Home screen. Missed voice message Signal Missed call Battery Missed text message 2. Connect the USB port with a computer or charger, to begin charging. Powering Press the Power Key for 3 seconds to power on/ off your watch. Press the Power key for 8 seconds to restart your watch. Charging 1. Ensure that the pins in the charging dock are aligned with the pins in the back cover of your watch. 5 3.
Changing band The watch comes with two bands. In order to replace the band, follow the steps below: 1. Remove the band 2. Attach the new band Aligned the silver knots to one side of the band holders and push the silver knots to the opposite side. When the second silver knot is aligned with the band holder, release the silver knot. Disconnect the band by pulling the silver knots to the right and the band will be released from the watch.
Settings list Press the Home key to enter the app list. Press the Volume up/down key to select the app. Icon thumbnail list Larger icon & app name A scroll bar or indicators Call(s) The Call app enables you to make and answer phone calls using your watch. Up to ten contacts can be stored in your watch. When there is an incoming call, press the Home key to answer the phone or press the Power key to reject the call. Press the Volume up/down key to mute the call.
between today’s forecast and the forecast for the next 4 days. Music The music app allows you to play music stored in your watch. Transfer music You can copy MP3 music files to the watch via USB. 1. Connect your watch to computer through USB charging docker. 2. Select the musics from your computer. Right Touch and choose “Copy/send to your watch”. Play music 1. Press the Home key to enter the app list. 2. Press the Volume up/down key to select Music. 3. Press Home key to play.
3. Press the Volume up/down key to select a new watch face, and press the Home key to save. Backlight 1. On the Home screen, press the Volume up key to enter settings. 2. Slide up/down, and press the Home key to enter backlight settings. 3. Press the Volume up/down key to set the backlight as 8s, 5s, 3s or off. Stay 3s to automatically save. The default is 3s. Sound 1. On the Home screen, press the Volume up key to enter settings. 2. Slide up/down, and press the Home key to enter sound settings. 3.
2. Slide up/down, and press the Home key to download the updates. About watch 1. On the Home screen, press the Volume up key to enter settings. 2. Slide up/down, and press the Home key to display the watch info. (Network, Model number, Serial number...etc.) Operation Systems • Android 4.3 and above • iOS7 and above Safety and use We recommend that you read this chapter carefully before using your device.
When MOVETIME Connected Watch is switched on, it should be kept at least 15 cm from any medical device such as a pacemaker, a hearing aid, insulin pump, etc. Please note that MOVETIME Connected Watch is a unibody device, the battery is not removable. Do not attempt to disassemble MOVETIME Connected Watch. If you disassemble your device the warranty will not apply. Disassembling the device may damage the battery and may cause leakage of substances that could create an allergic reaction.
Do not place MOVETIME Connected Watch in dishwashers, washing machines, or dryers. or expose to water or other liquids, expose to fire, explosion or other hazard. Do not place MOVETIME Connected Watch on or in heating devices, such as microwave ovens, stoves, or radiators. Only use the battery with a charging system that has been qualified with the system per CTIA Certification Requirements for Battery System Compliance to IEEE 1725.
For those host devices that utilize a USB port as a charging source, the host device’s user manual shall include a statement that the phone shall only be connected to CTIA certified adapters, products that bear the USB-IF logo or products that have completed the USB-IF compliance program. Battery Please note your MOVETIME Connected Watch is a unibody device, the battery is not removable. Observe the following precautions: • Do not attempt to open the back cover.
of Protection provided by Enclosures [IP Code]; test conditions: 15 - 35 °C, 86 - 106 kPa, 1 metre, 30 minutes). Despite this classification, your device is not impervious to water damage in any situation. Do not submerge the device. You may, for example, wear and use the device during exercise (exposure to sweat is OK), in the rain, and while washing your hands with fresh water. But submerging your device is not recommended and the device is only protected against low pressure water stream.
Resistance to solid objects such as dust 0: No special protection 1: Protected against solid objects larger than 50mm in diameter 2: Protected against solid objects larger than 12mm in diameter 3: Protected against solid objects larger than 2.
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
other people or any of their personal attributes, and duplicate or distribute them, as this may be considered to be an invasion of privacy. It is the user’s sole responsibility to ensure that prior authorisation be obtained, if necessary, in order to record private or confidential conversations or take a photograph of another person; the manufacturer, the seller or vendor of your device (including the operator) disclaim any liability which may result from the improper use of the device.
Licenses The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by TCL Communication Ltd. and its affiliates is under license. T-Mobile and the magenta color are registered trademarks of Deutsche Telekom AG. Other trademarks and trade names are those of their respective owners. Alcatel SM06 Bluetooth Declaration ID D0XXXXX Warranty TCL Communications Ltd.
• Removal or altering of the wireless device’s event labels or serial numbers (IMEI); • Damage from exposure to water or other liquids, moisture, humidity, excessive temperatures or extreme environmental conditions, sand, excess dust and any condition outside the operating guidelines; • Rooted devices; • Damage as result of physical abuse regardless of cause.
of delivery. Upon receipt, the service center will verify the warranty conditions, repair, and return your device to the address provided in the RMA. Disclaimer TCL communication Ltd.
schemes operated by your local or regional authority. You may return unwanted Alcatel products and electrical accessories to any Alcatel Approved Service Center in your region. Packaging and product parts should only be disposed of in accordance with national collection and recycling requirements. Please contact your regional authorities for more details. Device and battery as a unibody device must be disposed of in accordance with locally applicable environmental regulations.
EMERGENCY CALL Although all phones are equipped with 9-1-1 emergency calling capabilities, this phone may or may not permit its location to be approximated during a 9-1-1 call.* *Availability of this feature depends on upgrades to the (a) wireless network and (b) 9-1-1 calling system that are required to be installed by the local 9-1-1 response agency or public safety answering point (PSAP); these upgrades may not be available everywhere within our wireless coverage area or your roaming area.
Application Download and install Movetime app Creating an account 1. If you are a first time user, touch on Register to create your MoveTime account. For Android • Search for “Movetime” in the Google Play store. For iOS • Search for “Movetime” in the App Store.
2. Enter an Email account and set your password. A valid code will be sent to your Email account, input the code and touch “Next”. Pairing 1. Obtain the IMEI number. IMEI number can be obtained from • From the Kids watch box. • By pressing the Volume Up/Down and SOS button at the same time. 2. Input the IMEI number and press confirm. Note: The email account that you registered will be used to recover your password as well.
3. You will receive a code on your watch. Save the code and enter on the text box below and press confirm. QR code can also be used to all members on the watch. To add members using the QR code: • Save and share QR picture. • Directly share QR numbers to other members.
4. Select your identity. 47 5. Enter your child’s personal information.
6. If the MoveTime and phone have been successfully paired, the parent’s application main screen will now appear on your phone with a map indicating the MoveTime’s location. App main screen Show or hide the shortcut menu. Touch to refresh your MoveTime’s location. Touch to view and setup electronic fences. Touch to calculate the itinerary to your kid’s watch. Touch to see your kid’s step counting.
Battery level indicator: Touch to change the Power Saving settings. Touch to call your kid’s watch. Touch to access the voice messages exchanged with your kid’s watch. Members management Members can be setup in the parent’s application in 2 ways: manually or via the scanning of a QR code. Adding a member manually Touch the Address Book entry and then in the of one of the available contacts. Fill in Member’s identity, phone number and photo and save your changes.
Adding a member via QR code scanning Touch the Address Book entry and then in the of one of the available contacts to get the QR code. Messaging Voice message Touch the setting icon to select to send the voice message to the kid or to all the family members. The voice message is sent to the kid only by default. • Unread messages are indicated with a red dot. • Touch in one of the messages to listen to it.
Text message 1. Preset SMS in the app for kids to use in the watch and touch save. Up to 10 SMS can be saved in the Movetime App. The maximum wordage of Pre-SMS is 70. 2. OK, yes, on my way, I am busy now, I will call you back later are available by default.
Settings Safe zone Touch on the main screen to access the Safe Zone menu. Steps Touch to set a goal. Steps and distance are counted and saved after setting. Date statistics saves data from the current month. Month statistics saves data from the latest 12 months. You can setup geographical areas called safe zones (ex: home, school, grandma’s...) normally visited by your child. Once setup, you’ll receive notifications in your parent’s application everytime your kid enters or leaves a safe zone.
Manage watch 1. Touch the area on the right to enter the map page. Slide left to select Delete the watch. 2. Touch the profile picture to view the kids’ information. Mute time You can set the MoveTime to mute or toggle vibrate mode along with setting up schedules. Note that children can decide to unmute by adjusting the volume on their MoveTime, however vibrate mode can only be controlled via the App. 3. Touch the + to add new watch.
Upgrade Enter to check if a new software version is available for your watch and Movetime App.
