User's Manual

105 106
Follow these steps to insert your device into the VR goggles.
1. Put your fingertips in the hole slot and pull the top cover outward to
open.
2. Firmly press down on the clip to pull it back and insert your device into
the VR goggles. Make sure your device is powered on and the screen
unlocked.
Note: Don’t force the clip or it could break. Make sure it’s locked tightly,
or your device might fall out and be damaged.
3. Press the button to open the bottom cover.
4. Hold the VR goggles with two hands. Find the BACK and SELECT
buttons on the bottom.
The buttons are touch-sensitive and don’t need to be pressed down.
Notes:
•Keep the lenses clean and unscratched. You can clean them with the lens
cleaning cloth.
•The foam cushioning might deteriorate over time from sweat. Keep your
face clean and dry while wearing the VR goggles.
12�1�3 Configuring the VR Launcher
Follow these steps in VR mode after starting VR Launcher.
Note: The VR goggles recognize your head movement. You can move the
pointer in the center of the screen by moving your head in any direction.
Some applications might not display the pointer.
1. To interact while using the VR goggles, touch
the “SELECT” button or short press the button
on your earphones while aiming the pointer
at an icon.