Tus neeg siv phau ntawv
Table Of Contents
- I. General
- III. Technical Specifications
- IV. Structure and Working Principle
- 2. Working principle
- The detector uses a high-precision thermistor sens
- V. Installation
- 1. Points for on-site installation
- The wireless performance indicators of this produc
- VI. Test
- Warning: Please make sure that the polarity of the
- 1. The detector must be tested after installation
- 2. Simulated fire alarm: After successfully connec
- 3. During the test, the unqualified detector shall
- VII. Use and Operation
- 1. Network segment setting: Before the detector co
- 2. The device enters and exits the network: After
- A) Network access operation: When the control pane
- B) Network exit operation: When the control panel
- 3. Equipment alarm: When the temperature in the en
- 4. Device reset: When the device reports a fire al
- 5. Restore factory settings: After the detector is
- Note: The button function only has one click, thre
Yingkou Tiancheng Fire Protection Equipment Co., LTD
I. General
JTW-ZOM-TC5402W wireless addressable heat detector (hereinafter referred to as the detector) is a smart home
fire detector that uses a high-precision thermistor as the sensor. It can be used with the company’s wireless fire
alarm control panel /wireless fire linkage control panel (hereinafter referred to as the device) for supporting use.
The detector utilizes advanced wireless transceiver technology and a highly integrated micro-processing chip to
process data. It has the characteristics of high sensitivity, long transmission distance, and low power
consumption. It can accurately and quickly detect changes in ambient temperature, determine fire and call the
police.
This product has beautiful appearance design, convenient and reliable installation, and is suitable for places
where smokeless fires may occur, a large amount of dust or smoke and steam are trapped under normal
circumstances. This product is widely used in various residential buildings. The fire can be detected as early as
possible, and the people's lives and property can be protected to the greatest extent.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,the user is
encouraged to try to correct the interference by one or more of the following
measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
Important: You are cautioned that changes or modifications not expressly approved
by the party responsible for compliance could void the user's authority to operate the
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.