Tus neeg siv phau ntawv
Table Of Contents
- I. General
- III. Technical Specifications
- IV. Structure and Working Principle
- 2. Working principle
- The detector uses a high-precision thermistor sens
- V. Installation
- 1. Points for on-site installation
- The wireless performance indicators of this produc
- VI. Test
- Warning: Please make sure that the polarity of the
- 1. The detector must be tested after installation
- 2. Simulated fire alarm: After successfully connec
- 3. During the test, the unqualified detector shall
- VII. Use and Operation
- 1. Network segment setting: Before the detector co
- 2. The device enters and exits the network: After
- A) Network access operation: When the control pane
- B) Network exit operation: When the control panel
- 3. Equipment alarm: When the temperature in the en
- 4. Device reset: When the device reports a fire al
- 5. Restore factory settings: After the detector is
- Note: The button function only has one click, thre
Yingkou Tiancheng Fire Protection Equipment Co., LTD
2. Warranty: Our company is responsible for the maintenance of this product. If you find any problems, please
contact our company's technical service department in time. Users are not allowed to disassemble or repair by
themselves, otherwise the consequences will be at their own risk.
3. The maintenance contact information is as follows:
Liaoning·Yingkou Tiancheng Fire Equipment Co., Ltd.
Address: No. 11-2, Kechechang Xili, Xishi District, Yingkou, Pilot Free Trade Zone (Liaoning) China , City
Fax: 0417-4835568
Postcode: 115004
Tel：400-6930-119
Email: info@tcfiretech.com
Website: www.tcfiretech.com