User Manual

Getting To Know Create XT
21
EN
the “tweak list” and then adjust it with the Tweak
knob.
4. Using the optional Switch3 footswitch to turn effect
blocks on and off.
It’s usually best to find a preset or style that is close to
what you want and then tweak it and store it.
Tweaking Styles
Each style has settings that can be adjusted (or “edited”)
to customize the effects stored in a preset. In Create XT,
editing style values is referred to as “tweaking”.
To edit the current style, tap the Tweak
button to select
from the list of parameters, then turn the Tweak knob to
adjust it.
If an effect block is off, its tweak parameter will not be
available when cycling through the list.
Turning the Tweak knob may adjust one, or several
settings together, depending on the style. The tweak
parameters are described below. For the final list of
parameters available in each style, check the TC-Helicon
website on the Create XT product support page.
11.. BBaallaannccee
Affects the volume relationship between the active
effect blocks in the style. If there are more than two
blocks engaged, a factory mapping will allow control of
blocks most important to the overall sound.
22.. RReevveerrbb
Sets the Reverb decay parameter from short to long
(length or size of the reverb).
33.. DDeellaayy
Controls feedback when delay responds to Tap tempo.
Sets delay time when the delay is set to a fixed, shorter
value.