User Manual

Pedal

Front Panel Descriptions

3.Tone Button

Engages the Live Engineer Effects which smooth the

sound of your singing even when the main effect is off.

4. Mix Control

Controls the overall balance between your dry voice

(with Tone if active) and the Reverb/Delay. This is a

global control meaning that it will affect the sound of all

presets.

5. Style Selector Control

Selects and loads a preset from one of the 10 style

banks. Each bank has 10 style variations available by

press and holding the Tweak button, then tapping to

choose another style - press and hold again to return to

regular operation.

6.Tweak Control

Edits the value of the parameter chosen with the Tweak

button.The value will show briefly in the numeric display.

1 2 3 4 5 6

1. Input Control

Controls microphone pre-amplifier (input) gain. To set,

sing normally and watch the Input Light.

2. Input Light

Indicates input level. Flashing green, sometimes orange is

good. Flashing red shows a distorted peak has occurred

and input level should be reduced.