Operation Manual

UTILITY BUTTON
MIDI CONFIGURATION
The MIDI FILTER parameter, under the
MIDI menu, has been
updated so that you can filter out incoming System Exclusive
messages and MIDI Program Change messages. This param-
eter can be set to an '
OFF' position, where no filtering takes
place, or you can have both filters '
ON' at the same time.
DIGITAL I/O
DIGITAL I/O is a new menu, used for setting the SAMPLE RATE of
the digital signal, and the type of dithering employed in the
digital domain. You can choose from
44.1KHZ, or 48 KHZ sam-
ple rates, or
EXT for an external sample rate, either
44.1KHZ or
48KHZ
. On the front panel lens, if you are synchronized at 44.1
KHZ, a 44.1K indicator will light. If you are synchronized at
48KHZ, a 48K indicator will light. If you are
not linked to a digital signal properly, both
indicators will flash.
DITHERING can be set to 8, 16 or 20 bits, or an
'
OFF' position.
%
20
%
VoicePrism Plus User ManualUtility Button