Operation Manual
72
The Edit Button
f TRANSDUCER IN and OUT GAIN
These act similarly to a guitar distortion pedal or
an amplier with input gain and master level con-
trols. IN GAIN boosts or attenuates the amount
of distortion for the distortion type selected.
When you adjust the IN GAIN parameter, just
like a guitar amplier, the overall level of the effect
goes up and down. Use the OUT GAIN control
to adjust the output level of the Transducer block
to properly balance the current preset with the
others.
f PRESENCE GAIN, PRES FREQ and
PRES WIDTH
The parametric EQ allows a peak/dip lter to be
added to help emulate the sonic characteristic
of various speakers such as a megaphone which
has a very narrow mid peak. GAIN adjusts the
amount of boost or attenuation while FREQ sets
the center frequency of the lter. WIDTH sets
how narrow or wide the lter will be set. Note
that excessive boost of certain narrow frequen-
cies can induce feedback with even the best
monitor equipment and placement.