Operation Manual

Pitch Button Overview

Pressing the Pitch button activates Auto Chro-

matic pitch correction. For most applications, this

is all that is required to set this feature. There is

no need to set Key or Scale; all notes that you

sing in the 12 tone western chromatic scale are

corrected to the nearest scale tone.

This type of vocal pitch correction is quite subtle

at its factory setting of 50% but even the most

highly skilled and on-pitch singers will hear a slight

chorusing from the PA or monitors with it en-

gaged.

Press and hold the Pitch button to access the

PITCH tab and adjust the single parameter for

this feature. Once you see this tab, the Pitch but-

ton can be cycled on and off to allow you to hear

the difference. Press the Home button to exit the

Pitch edit tab.

f AUTO-CHROMATIC AMOUNT

The factory default value of 50% is active when

you enter the PITCH edit tab. Turning the control

towards 0% reduces the correction effect and

turning towards 100% increases it. Above 50%

the effect becomes more noticeable when you

slide from note to note. This is the effect of faster

transition speed between your input note and

the closest scale tone as well as the fact that the

algorithm is trying to pull you closer to the target.

For those singers who want to use or experiment

with scale-based pitch correction and perhaps

even the jagged, modern HardTune effects, there

are presets set up specically for this that can be

found by pressing the Wizard button and choos-

ing CORRECT or HARDTUNE as the Tag.

The Pitch Button