Operation Manual

Setup
VoiceLive 3 – Reference manual (updated 2015-10-20) 171
FOOTSW-1 to FOOTSW-3 or
FOOTSW-1 to FOOTSW-6
parameters
These parameters are only available when the
Footswitch jack parameter has been set to
Switch-3 or Switch-6.
FOOTSW parameter settings
Each Switch-3 or Switch-6 footswitch can be as-
signed to one of the following controls:
► STEP
► PITCH COR(rection)
(Global in SETUP, not HardTune)
► ALL MUTE
► µMod
► Delay
► Reverb
► Voc(al) HIT
► Double
► Harmony
► Transducer
► HardTune
► Rhythmic
► Stutter
► Choir
► Synth
► Harm(ony) Hold*
► Set Key
► Tap Tempo
► Bypass
► G µMod (G = Guitar)
► G Delay
► G Reverb
► G HIT
► G Comp(ressor)
► G Drive
► G Amp
► G Rhythm
► G Octaver
► G Wah
► G Mute
► ALL HIT
► Go Looper (enter looper Layer)
► Loop Input
► Tuner
► 1But(ton)Looper
► LPlayRec (Looper Play Record Overdub)
► LStopErase (Loop Stop Erase)
► Loop Undo
► L(oop) Erase All
►
* Harmony must be active for this to have an ef-
fect.
** Toggles the Loop Layer. You may find this a
more convenient way of entering the Loop
Layer quickly, compared to holding the Layer
button.
Loop Controls on Switch-3 and Switch-6
If you have connected an (optional) Switch-3 or
Switch-6 to your VoiceLive 3, you can use it to
control some functions for Track A of the Looper.
For more advanced interaction with the Looper,
we still recommend using the Loop Layer, since
the user interface changes contextually based
on actions you perform.
Keep in mind that loop controls assigned to
Switch-3 oder Switch-6 still adhere to the op-
tions for the currently active Loop Slot, like Sync,
MET, Input etc.