Operation Manual

Setup
VoiceLive 3 – Reference manual (updated 2015-10-20) 154
Vibrato Boost parameter
Use the Vibrato Boost parameter to set how
VoiceLive 3 should process incoming MIDI mod-
ulation data.
Parameter settings:
► Boost: The modulation data received via MIDI
is added to the vibrato already applied to Har-
mony voices.
► Manual: The modulation data received via
MIDI is directly controlling the Vibrato amount.
Sysex ID parameter
Use the SysEx ID parameter to set the Sysex ID
that is used for addressing devices.
If you are using VoiceSupport for firmware up-
dates and/or Preset management, you need to
set the SysEx ID to 0.