Instruction Manual

Volume control
6 Reveal 402 / 502 / 802
rear panel, using the 3.5mm mini-jack cable that
came with the first speaker.
– Connect the “MONITOR LINK” jack of the first
loudspeaker to the “MONITOR LINK” jack of the
second loudspeaker using the 3.5 mm mini-jack
cable that came with the second speaker.
– Set the “SPEAKER POSITION” switch of each
monitor according to its physical position.
– Set the position switch of the left loudspeaker
(when facing the fronts) to “-►”.
– Set the position switch of the right loudspeaker
to“◄-”.
Volume control
The rear mounted “VOLUME” control knob allows for
matching each loudspeaker’s volume to your mix-
ing desk or other equipment. It will also allow you to
adjust the relative levels between speakers in a sur-
round system.
EQ
The EQ control switch adjusts the tweeter volume. It
should normally be set to “NEUTRAL”.
If you are working in a bright environment, set the EQ
control switch to “HI CUT”. In a dull environment, set
the EQ control switch to “HI BOOST”.
Cabinet care
The cabinet may be cleaned with a soft lint free cloth.
The use of solvents or abrasive cleaners should be
avoided.