User Guide

17 PERFORM-VE User Manual
Echo Div
Echo Division controls both the Delay’s rhythmic division and its type. Blue LED selections are Ping-Pong delays in which echoes ‘bounce’ between left and right in the
stereo eld, while green LED selections are delays in which echoes are heard on both sides of the stereo eld. The red LED selection is a short single-repeat echo called
a Slapback delay, useful for dialing in a retro 50’s pop song vibe. Hold div to edit.
NOTE: As with other eect division parameters, a white LED indicates a straight quarter note division.
Echo Delay
5.6 Filter
Anything that EQ’s (equalizes), lters or distorts your voice falls into the Filter category. You can sound like you’re on an old radio or distort your voice for an edgy
attack. Be careful with Megaphone eects when you’ve got a loud PA. We need to adjust EQ a lot to create these sounds, so they’re a bit more prone to feedback than
other eects. Hold style to select dierent styles.
Filter Style: LPF/HPF
The rst lter style is dierent from the rest: LPF/HPF is a LowPass/HighPass lter combination designed for shaping and sweeping musical audio. It also sounds
great on rhythm tracks and noise.
Echo Delay is a master parameter that simultaneously edits the delay’s feedback
and output level, where greater amounts will expand the volume and increase
the number of delay echoes that you hear. At 100% the delay will feedback into
echoes that never stop! Hold delay to edit.
Range: 0 to 100%
Applies to: LEAD Vocal
MIDI Voices
Applies to: LEAD Vocal
MIDI Voices
LOOPER Drums & Audio