Quick Start Guide
36 HARMONY V100/ V60 Quick Start Guide 37
Specications
Harmony V100 Harmony V60
Audio inputs
Guitar input ¼" TRS balanced/XLR combo
 Input impedance  2 MΩ balanced/1 MΩ unbalanced
Microphone input ¼ " TRS balanced/XLR combo
 Input impedance  XLR: 2.9kΩ balanced; ¼" 10kΩ TRS balanced/5k TS unbalanced
Aux input  3.5 mm TRS stereo
 Input impedance  19 kΩ
Audio outputs
Guitar/right out and Mic/left out  XLR balanced, female
 Output impedance  400 Ω
 Max. output level  0 dBu
 Switches DI, FX, Mix
Headphones out 3.5 mm TRS stereo
 Output impedance  10 Ω
 Max. output level  8 dBu
Vocal section controls
Knobs
Volume (1 to 10)
Adaptive tone (o to max)
Correction (o to max)
Harmony selector, 8 position
Harmony level (0 to 10)
Reverb (o, room, club, hall)
Echo (o, tape, digital, slap)
Switches
Phantom on/o
Talk on/o
Anti-feedback on/o
Harmony enable/disable
LEDs Phantom (red), Reverb (green), Echo (green), Harmony voice (green, 8 selections)
Backlit switches Talk (green), anti-feedback (green, or blue when operating), harmony (green)
Guitar section controls
Knobs
Volume (0 to 10)
Bass, shelving (-12 to 12 dB)
Mid, peaking (-12 to 12 dB)
Treble, shelving (-12 to 12 dB)
Chorus (detune, silk, corona)
Reverb (o, room, club, hall)
Echo (o, tape, digital, slap)
Switches
Mute on/o
Anti-feedback on/o
Bodyrez o, Bodyrez-1, Bodyrez-2 Bodyrez-3
Harmony enable/disable
Display Tuner note 8-segment, red
LEDs
Chorus (green), reverb (green), echo (green)
Tuner sharp/at/in-tune (red)
Backlit switches
Mute (red), anti-feedback (green, or blue when operating), 
bodyrez (red, green, blue selections)
Harmony V100 Harmony V60
Footswitchable controls
Microphone Section
Talk on/o
Harmony on/o at the current setting
Reverb on/o
Echo on/o
Guitar section
Mute on/o
Chorus on/o
Reverb on/o
Echo on/o
Harmony on/o at a selected setting
Looper section
Tap Tempo
Play/record
Stop
LEDs Green when footswitch engaged, red when recording
Looper controls
Knobs Level (0 to 10)
Switches
Voice/all/guitar
Tap tempo
Play/record
Stop
Backlit switches Tap tempo (ash red at tempo), play/record (green play, red record), stop (red)
Rear panel section
Connections
AC input IEC
USB B type
Foot switch, 5-pin DIN (for FST4 only)
Guitar/right out, XLR male
Mic/left out, XLR male
Aux in, 3.5 mm
Switches
AC power on/o toggle
Top tweeter on/o
Guitar/right out, DI/FX/MIX selector
Mic/left out, DI/FX/MIX selector
Ground lift, XLR audio
Knobs Aux input level (0-10)
USB
Type Class compliant USB 2.0, type B
Supported Operating Systems Windows 7 or higher 
Mac OS X 10.6.8 or higher
Windows driver Required driver is supplied
Audio input and output 2 channels, 24 bit, 48kHz
Amplier
Output power  110 W  80 W
Type Class- D
Protection Short circuit, thermal










