DUPLICATOR Ultra-Simple Vocal Effects Stompbox with Doubling, Reverb and Pitch Correction User Manual
DUPLICATOR User Manual Important Safety Instructions Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼" TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
DUPLICATOR User Manual 1. Controls (1) (2) (3) (4) (5) (8) (6) (9) (10) (11) (12) (7) (1) DOUBLING knob selects the type and amount of doubling effect on your voice. The first two types allow a tight voicing that has less variation from your original voice, or loose doubling that varies more in pitch and time. The 3rd type adds an extra voice an octave below your original note. Adjust the knob within your preferred effect type to determine the volume of the second voice.
DUPLICATOR User Manual 2. Operation Micro USB cable MP-75 microphone Mixing board Power cable Connection • Connect a microphone to the MIC jack • Connect the OUT jack to a mixer, interface or active speaker • Connect power cable (optional) • Connect a micro USB cable to a computer (optional) Momentary Mode The standard function of the footswitch is a latching style, meaning that each press of the footswitch turns the doubling effect on and off.
DUPLICATOR User Manual 3. Specifications Input Mic Input Impedance: Balanced: 2.68 kOhm Mic Input Level @ 0 dBFS: -42 dBu to +1 dBu EIN @ Max Mic Gain Rg = 150 Ohm: -126 dBu Mic input SNR: >104 dB Output Output Impedance, Bal./Unbal.: 200/100 Ohm Output Full Scale: +1 dBu Dynamic Range: >104 dB, 20 Hz to 20 kHz Frequency Response: +0/-0.
